TCL 55US5800 User Manual page 15

Note: Store the stand and stand screws in a safe place in case you decide to use the stand in the
future.
Connect your TCL Roku TV
This section explains how to connect your devices to your TV.
Connecting an antenna, cable, or satellite box
If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has only an
antenna output, connect a 75-ohm coaxial cable (not provided) from the device to the ANT/CABLE input
on the TV.
Tip: If you are using an antenna with a 300 ohm twin-lead cable, you need to use a 300-75 ohm
adapter (not provided) to adapt the cable to a connection that is compatible with the TV's
antenna input.
Tip: If you receive your TV stations through a set top box from a cable or satellite TV provider,
connect it to the TV using the best connection method available. From most to least desirable:
®
HDMI input – Digital HD and SD video
•
AV input – analog SD video
•
Antenna input – analog SD video using NTSC
•
Connecting a component with a composite AV video cable
If the best connection available on your component is AV or composite video output, connect it to the
TV using a composite AV cable (not provided). Composite AV cables typically have three RCA-type plugs
on each end, color coded as follows:
Yellow: Video
•
Red: Audio, right channel
•
White or black: Audio, left channel
•
Connect each plug to the corresponding connector on
the component and on the TV.
Page 7