Download Print this page

Body Clock Profile TENS Instructions For Use Manual

Professional pain relief device
Hide thumbs Also See for Profile TENS:

Advertisement

For USA only:
Federal law restricts this device to sale use by or on
the order of a practitioner so licensed by the state.
Medical Devices Directive 93/42/EEC
Body Clock Health Care Limited
108 George Lane, South Woodford, London E18 1AD
Tel: 020 8532 9595 Fax: 020 8532 9551
UK: www.bodyclock.co.uk e-mail:profiletens@bodyclock.co.uk
USA: www.bodyclock.net e-mail:profiletens@bodyclock.net

Advertisement

loading
Need help?

Need help?

Do you have a question about the Profile TENS and is the answer not in the manual?

Questions and answers

Summary of Contents for Body Clock Profile TENS

  • Page 1 Federal law restricts this device to sale use by or on the order of a practitioner so licensed by the state. Medical Devices Directive 93/42/EEC Body Clock Health Care Limited 108 George Lane, South Woodford, London E18 1AD Tel: 020 8532 9595 Fax: 020 8532 9551 UK: www.bodyclock.co.uk e-mail:profiletens@bodyclock.co.uk...
  • Page 2 Profile TENS - Technical Data Equipment type: Dual channel digital TENS Output voltage: 0 - 50v peak to peak adjustable in levels 0 - 20 (through a 500 Ohm load) Guarantee Output Intensity: 0 -100 mA peak to peak adjustable in level 0 - 20 (measured...
  • Page 3 Rate Modulation - Frequency modulates 7. Pulse width control. This two way button enables you to adjust the decreasing from 100Hz to 20Hz in a period of 8 seconds. The frequency then increases from 20Hz pulse width upwards or downwards as desired between 25 - 250 to 100Hz in the next 8 seconds.
  • Page 4: Professional Functions

    Automatic: If intensity levels are 0 on both channels and if the unit has Profile TENS key Shutdown: not been in use for five minutes it will shut down automatically. Low battery A flashing symbol indicates low battery. 1 and 2. Two way buttons to increase and decrease intensity for Indicator channels 1 and 2.
  • Page 5 Profile TENS diagram INSTRUCTIONS FOR USE The Profile TENS is a dual channel Intensity control for TENS, supplied with leadwires, elec- Intensity control channel 2 trodes, battery and carrying pouch. for channel 1 On/Off control 1. Slide battery cover off by gently...
  • Page 6 Control Theory. Please refer to the rate quickens and then slows down your Profile TENS to switch off 6. With the unit switched off, insert accompanying Book “An Easy Guide creating a pleasant tingling sensation.