AS560USB System Requirements • Computer with Pentium 200 MMX or higher processor. • Windows 98/98SE/ME/2000/ XP and Vista Operating System. • 20 MB Hard Disk free space or above • Sound card for voice features • 1 available USB port.
AS560USB Hardware Setup This chapter contains detailed instructions how to install and configure the 56Kbps USB modem, as well as how to verify if your installation is correct. We recommend that you follow the steps accordingly to avoid future problems.
Page 4
AS560USB Locate an available RJ-11 modular jack telephone outlet. Insert one end of the modular cord that came with your USB 56Kbps modem into the RJ-11 modular jack marked “LINE” on the modem. Then plug the other end into the modular jack on wall outlet.
Page 5
AS560USB Configure the Modem on Win9X / WinME / Win2000 / WinXP / Win Vista Please turn on your computer. As Windows 98SE/2000/ME/XP/Vista starts, it will detect a new hardware has been plugged or added, and start the “Add New Hardware Wizard”...
Page 6
AS560USB Please select “OK”. Click “Continue Anyway“ to finish the installation. (98SE/ME/2000 USER, please skip this step) Installing FaxTalk Communicator FaxTalk Communicator SE 4.7 integrates advanced fax, voice messaging, and speakerphone capabilities into a single application and includes support for TAPI, OLE, Distinctive Ring, Caller ID, and Windows dialing properties.
Page 7
AS560USB To install the FaxTalk software you will need to run the Utility CD and click on Install Software Utilities, then click on FaxTalk SE to start the installation Follow the onscreen instructions and once setup is complete you will need to run the program from...