Disconnecting The Camera From The Computer - Sony ILCA-99M2 Instruction Manual

Disconnecting the camera from the computer

Perform steps 1 and 2 below before performing the following operations:
• Disconnecting the micro USB cable.
• Removing a memory card.
• Turning off the product.
1
Click (Safely Remove Hardware and Eject Media) in the
taskbar.
2
Click [Eject ILCA-99M2].
Note
• On Mac computers, drag and drop the memory card icon or the drive icon
into the "Trash" icon. The camera will be disconnected from the computer.
• On Windows 7/Windows 8 computers, the disconnection icon may not
appear. In that case, you can skip the steps above.
• Do not remove the micro USB cable from the camera while the access lamp is
lit. The data may be damaged.
GB
59