Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV System]: Select a TV system that
•
matches your TV. By default, this setting
matches the common TVs in your country.
[Aspect ratio]: Select a picture display
•
format to fit the TV screen.
•
[Picture Setting]: Select a predefined color
setting, or customize a setting.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Analogue Output]: Select an audio format
•
for sound output when this player is
connected through the AUDIO OUT L/R
connectors.
[Digital Audio]: Select an audio format
•
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output] - Select a type of
•
digital output: [Off] - Disable digital
output; [All] - Support multi-channel
audio formats; [PCM Only] - Downmix
to two-channel audio signal.
[LPCM Output] - Select a LPCM
•
(Linear Pulse Code Modulation)
output sampling rate. The higher the
sampling rate, the better the sound
quality. [LPCM Output] is enabled only
when [PCM Only] is selected under
[Digital Output].
[Volume]: Change a volume level.
•
[Sound Mode]: Select a preset sound effect.
•
[Night Mode]: Select quiet or full dynamic
•
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1
Press .
2
Select [Setup] > [Preference] to access
the preference setup options.
[Audio]: Select an audio language for video.
•
[Subtitle]: Select a subtitle language for
•
video.
[Disc Menu]: Select a menu language for a
•
video disc.
•
[Parental Control]: Restrict access to
discs that are encoded with ratings. Input
"136900" to access the restriction options:
When the password field is highlighted,
press OK to enter an input stage, use
numeric buttons on the remote control to
input your password.
•
[PBC]: Display or skip the content menu
for VCD and SVCD.
[Password]: Set or change a password to
•
play a restricted disc. Input "136900" if you
do not have a password or if you have
forgotten your password
[DivX Subtitle]: Select a character set that
•
supports the subtitle of your DivX video.
•
[Version Info]: Display the software version
for this player.
[Default]: Reset all settings to the factory
•
default, except for the settings for [Disc
Lock], [Parental Control] and [Password].
Note
•
If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
•
The rating levels are country-dependent. To allow all
discs to be played, select [8 Adult].
EN
5