MP3: 22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 8 kbps - 320 kbps
WMA: 32 kbps - 192 kbps
Dimensions (W x H x D):
270 x 37.5 x 209 (mm)
Net Weight: 1.0 kg
Power supply rating: 110-240V~, 50-60Hz
Power consumption: 10W
Power consumption in standby mode:
Remote control and two batteries
Type: Semiconductor laser InGaAIP (DVD),
Wave length: 658 nm (DVD),
790 nm (CD)
Output Power: 7.0 mW (DVD),
10.0 mW (VCD/CD)
Beam divergence: 60 degrees
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
The TV video input channel is not correctly
selected (see the TV's user manual).
If you have changed a TV system setting,
switch back to the default setting:
1) Press to open the disc compartment.
2) Press SUBTITLE.
No sound output from the TV.
Make sure that the audio cables are
correctly connected between this player
and the TV.
No sound during DivX video playback.
The audio codes are not supported.
No audio output from the loudspeakers of the
connected external audio device (for example,
stereo system, amplifier receiver).
Make sure that the audio cables or coaxial
cable are correctly connected.
Switch the external audio device to
correct audio input source.
Disc cannot be read.
Make sure that this player supports the
disc (see "Specifications" > "Playable
For a recorded disc, make sure that the
disc is finalized.