Spirit flow-x Function Reference page 113

6 decimal places when
input 'API 2540 rounding'
> 0, as in accordance
with table 23.
Hydrometer Only applies for conversion
correction method
'1: From observed to standard
conditions'
0: Disabled
1: Enabled
API 11.2.1 0: Disabled
rounding The calculation of the
compressibility factor F is
performed with full
precision
1: Enabled
API-MPMS 11.2.1
rounding and truncating
rules are applied. The
compressibility factor F is
rounded to 3 decimal
places as specified in the
standard.
Equilibrium The equilibrium pressure is
pressure considered to be 0 psig for
liquids which have an
equilibrium pressure less than
atmospheric pressure (in
compliance with API MPMS
12.2 par. 12.2.5.4)
Conversion 1: From observed to standard
method conditions
2: From standard to observed
conditions
Function outputs Remark
Status 0: Normal
1: Input argument out of range
2: Calculation error
3: No convergence
Output relative Depending on the conversion
density method this is the relative density
either at 60 °F and the
equilibrium pressure or at the
observed temperature and
observed pressure
CTL Volume correction factor for
temperature.
Value will be rounded according
to input 'API2540 rounding'
CPL Volume correction factor for
pressure
Value will be rounded according
to input 'API 11.2.1 rounding'
CTPL Combined volume correction
factor
CTPL = CTL * CPL
K0 Actual value of constant K0 used
for CTL calculation
Flow-X─ Function Reference
Flow-X General functions - fxAPI_RD60F_1980
- HYDROCOR
- API1121RN
D
psig EQUIPRES 0..2000
CONVERSIO
N
EU SW tag Alarm
- STS
FIOOR
CALCERR
NOCONV
- RD
- CTL
- CPL
- CTPL
- K0
4-113
0
0
0
1
Fallback
1
0
1
1
1
0