Table of Contents
Advertisement
Brightness/
Contrast/
Saturation/
Sharpness/
Battery Status
Timer
5.
Select "Setup" at the top center and use the menu down the left side to
navigate to the network camera's various settings. Each menu item is
described in the following chapters.
Adjust various parameters relating to the
network camera's image appearance using
the sliders. Click and drag the blue lever to
change the value for each category and click
Save Value.
Color-coded (green, orange, red) status of the
camera battery.
Counts down from 120 seconds until the
camera will go into standby. After 120
seconds the button is labelled "Continue".
The camera will remain in standby to
conserve battery power until:
A. The button is clicked.
B. Sound is detected.
C. The EdiLife app live view is activated.
28
Advertisement
Table of Contents
