Table of Contents
Advertisement
5.
EdiView Finder will list all cameras on your local network, along with each
camera's name, model, IP address and MAC address.
Click the search icon to refresh the list if your camera is not
displayed.
The network camera's IP address is displayed on this screen. After
setup, you can enter this IP address into the URL bar of a web
browser on the same local network to access your network
camera's web-based configuration interface.
6.
Double click your camera and then choose "Yes" or "No" if you wish to set
up a wireless connection. If you choose "No" please go to step 10.
7.
Unplug the Ethernet cable from your network camera and click "Next".
Please wait a moment for the camera to detect the connection.
16
Advertisement
Table of Contents
