Subscribe to Our Youtube Channel
Related Manuals for SmartAVI FXCORE MX88
Summary of Contents for SmartAVI FXCORE MX88
- Page 1 FXCORE MX88 User Manual Long-Distance KVM Fiber Optic Matrix Switch 8X8 KVM Fiber Optic Matrix Switch Delivers KVM Operations, Uncompressed HD Signal Routing Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131...
-
Page 2: Table Of Contents
NAVIGATING THE ON SCREEN DISPLAY (OSD) EDID LEARNING RS-232 CONTROL RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE LIMITED WARRANTY STATEMENT WHAT’S IN THE FXCORE MX88 Multi-mode Model BOX? PART NO. QTY. DESCRIPTION FXCM-MX0808S FXCore Fiber Optic Multimode 8x8 KVM Matrix Switch... -
Page 3: Introduction
DVI AV (Audio and Video) opera- tion. In critical environments where security and speed are essential, the FXCORE MX88 enables users to control AV connectivity with 1080p HD video, audio, and RS-232. - Page 4 This provides the least signal attenuation and provides transmission over much longer distances than Multi-mode. Device-to-Matrix routing distance of 15 miles in single-mode, 30 miles from device to device. Transmitters and Receivers are not included with the FXCORE MX88 fiber optic matrix switch. They must be ordered separately. ORDERING INFO: FDX-3000-MX Multimode Fiber Extender Up to 1400ft.
-
Page 5: Technical Specifications
1400 ft. @ Multimode 50/125 μm MMF—OM4 Cable Operating Distance Up to 15 miles, 30 miles transmitter (Computer) to receiver (Keyboard, Mouse, Single-mode Display) with FXCORE MX88 in the middle FC-PI 200-M5-SN-I and 200-M6-SN-I 2.125 GBd Connector Compliance FC-PI 100-M5-SN-I, FC-PI 100-M6-SN-I, FC-PH2 100-M5-SN and FC-PH2 100-M6- SN-I 1.0625 GBd... -
Page 6: Hardware Installation
8. Optionally connect up to 8 RS-232 devices to the FDX-3000-MX Receivers. 9. Connect Duplex Fiber Optic cables from each Transmitter to the INPUT ports of the FXCORE MX88. 10. Connect Duplex Fiber Optic cables from each Receiver to the OUTPUT ports of the FXCORE MX88. -
Page 7: Navigating The On Screen Display (Osd)
NAVIGATING THE ON SCREEN DISPLAY (OSD) To access the OSD menu, use the keyboard attached to the FDX-3000-MX Receiver and press the Hot Keys Ctrl+Ctrl+'o'. The OSD menu will display all of the inputs in a list. Commands can be performed in the OSD menu through the use of the keys outlined on the bottom of the menu. The commands include: Ctrl+Ctrl+'o' (Activate the OSD Menu) F3 Disconnect... -
Page 8: Rs-232 Control
RS-232 CONTROL You can control the FXCORE from a PC via RS-232 using a terminal client software such as PuTTY. Check the RS-232 connectors on your PC serial port or your USB to RS-232 adaptor and the FXCORE to determine the cable needed. Use a terminal client software such as PuTTY to connect to the FXCORE. -
Page 9: Rs-232 Integration With Third Party Software
RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE Command Mode. These commands should be supported in both Command Mode (CM) and Debug Mode. nn = frame address #00 to #FF (default = 00) cc = Input, computer #01 to n (max 08) uu = Output, user #01 to n (max 08) <CR>... -
Page 10: Rs-232 Integration With Third Party Software
RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE (Continued) Debug Mode Enter command \\FnnD<CR> from Command mode. The username and password are case sensitive. Default USERNAME: Admin Default Password: Pass Commands for Debug mode only: Function Description Protocol Password Sets the passwords for users and Admin \\FnnWuu<CR>... -
Page 11: Limited Warranty Statement
LIMITED WARRANTY STATEMENT A. Extent of limited warranty Smart‐AVI Technologies, Inc. warrants to the end‐user customers that the Smart‐AVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. Smart‐AVI limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any: a. Improper or inadequate maintenance or modifications b. Operations outside product specifications c. Mechanical abuse and exposure to severe conditions If Smart‐AVI receives, during applicable warranty period, a notice of defect, Smart‐AVI will at its discretion replace or repair defective product. If Smart‐AVI is unable to replace or repair defective product covered by the Smart‐AVI warranty within reasonable period of time, Smart‐AVI shall refund the cost of the product. Smart‐AVI shall have no obligation to repair, replace or refund unit until customer returns defective product to Smart‐AVI. Any replacement product could be new or like new, provided that it has functionality at least equal to that of the product being replaced. Smart‐AVI limited warranty is valid in any country where the covered product is distributed by Smart‐AVI. B. Limitations of warranty To the extant allowed by local law, neither Smart‐AVI nor its third party suppliers make any other warranty or condition of any kind whether expressed or implied with respect to the Smart‐AVI product, and specifically disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. C. Limitations of liability ... - Page 12 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no war‐ ranty of any kind with regard to this material, including but not limited to, implied warranties of merchant‐ ability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for inci‐ dental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc. 20160819 ...
Need help?
Do you have a question about the FXCORE MX88 and is the answer not in the manual?
Questions and answers