Pentax VersaCam IC-360 User Manual page 46

Firmware version 1.2.1.
Table of Contents

Advertisement

3. Lens Specification
Focal Length
Digital Zoom
Max. Relative Aperture
Min. Focus Distance
Min. Illumination
4. Pan/Tilt Specification
Pan Rotation
Pan Speed Manual
Preset
Tilt Rotation
Tilt Speed Manual
Preset
Preset Positions
5. Network
Browser
Connector
Installation
Protocols supported
S/W Update
Management
6. Mechanical
Dimensions
Weight
Dimensions
Weight
7. Environmental
(*) This data is a target specification.
Operating Temperature
Storage Temperature
Relative Humidity
Storage Humidity
Typical
Environment
*Always use the attached Dome to prevent dust or other contamination.
F3.9mm to 62.4mm 16x Optical Lens
8x (Total 128x possible)
Wide 1:1.4, Tele 1:2.7
40" (1,000 mm) (Tele End)
3.0/0.5 Lux (Slow Shutter Mode)
360º continuous
0.8 to 120 /sec. (adjustable in 64 steps)
0.8 to 240 /sec. (adjustable in 64 steps)
0 to 90º
0.8 to 120 /sec. (adjustable in 64 steps)
0.8 to 180 /sec. (adjustable in 64 steps)
Up to 64 positions
MS Internet Explorer V. 4.0 or later
Netscape V. 4.5 or later, up to V. 4.7
JAVA Applet for non PC User (Mac or Unix)
10 Base-T Ethernet (RJ-45)
Assign IP address using setup program or ARP, RARP protocol
TCP/IP, HTTP, ARP, RARP, ICMP, DHCP, FTP and SMTP
Flash memory allows remote software updates over the network
using FTP or proprietary 'upgrade.exe' software
Configuration is achieved using a proprietary setup program and the
Web server built-in Admin. Page
H x W x L = 1.8" (45mm) x 3.3" (92mm) x 5.8" (146mm)
4.1 lb. (1855g), without Power supply
160 x 201 mm (Dome 132 mm)
6.40 x 8.04 inch (Dome 5.28 inch)
approx. 4.6 lb (2.1kg)
32º to 104º F (0º to 40º C)
-4º to 104º F (-20º to 60º C)
10 to 75% (No condensation)
10 to 95% (No condensation)
1.5A, Peak 3A
Indoor*
40
VersaCam IC-360 User's Guide

Advertisement

Table of Contents
loading

Table of Contents