Custom Configuration - Pentax VersaCam IC-360 User Manual

11) Custom Configuration

Web Server TCP Port:
The TCP ports used by a
VersaCam IC-360
assignable by the admin-
istrator. It is through this
"Web Server" port that
users can access
VersaCam IC-360
through which the camera
will send its web page and
configuration
Normally, the 80 port is
assigned by the network
administrator as a Web
Server TCP port like other ordinary Web Servers on a network.
Video Server TCP Port:
The "Video Server" port identifies the port number through which a VersaCam will
transmit its images.
Both the port for Web and Video data should be opened and available to the network to
which the VersaCam is attached.
other of these ports may be closed.
the network administrator make both ports available, or request that the network
administrator make available alternative port numbers for use.
must be used for either the Web or Video, the administrator must enter the port
number(s) on this configuration page.
Select Main Page:
The administrator may assign the viewer page desired as the default
page that appears when a user first accesses the VersaCam.
administrator can choose from among 3 different html viewer pages.
There are, at present, called "Default Viewer," "720x486 Viewer,"
and "Server Push Viewer."
largest browser screen and the largest image page possible.
may be used when the user is behind a firewall and cannot directly access the camera
otherwise.
Viewer Editing:
Certain presentation aspects of the default viewer are designed for the administrator to
edit easily. The editable features of these pages are:
- Main Title: This string changes the main title that is displayed at the bottom of the
default viewer.
- Logo Image Source URL: The administrator may assign a URL pointing to a
particular site from which a default viewer gets the logo that appears in the upper left
corner of the viewer window
- Logo Image Link URL: The administrator may link the logo to a particular web page.
By clicking on the logo, users will be transferred to the selected web page.
are
a
and
data.
Normally the 8080 port is assigned as a server TCP port.
Where a network firewall is installed, one or the
In this case, the installer should either request that
The 720x486 Viewer creates the
37
If alternative port(s)
The
The Server Push Viewer
VersaCam IC-360 User's Guide