Memory Full; Playback - MAGINON MS-7100 Instruction Manual

6.3.5. Memory full

If the SCAN key is pressed in the Recording mode and the
following warning appears on the Multi Scanner display, the
used memory is full. In this case you will have to first transfer
the images to the computer or insert a new memory card
before scanning further images.
Note:
• If the memory card is removed or inserted whilst the Multi Scanner is switched on, a
warning message that the device has to be restarted, appears on screen. The scanner then
switches off automatically. The scanner has to be switched on again to continue scanning.

6.4. Playback

Select Playback in the Main menu to view images already scanned. Whilst the scanner is switched
on, you can return to the Main menu by pressing the MODE button or the Menu symbol. Using the
 /  buttons in the Main menu, select the "Playback" mode and press the ENTER key.
16
Film scanner mode
or
Photo scanner mode
After Sales Support
00 800 - 78 77 23 68
MODEL: MS 7100
YEARS
WARRANTY