Powering On/Off The Mobile Phone; Connecting To The Network; Dialing Calls - Nordmende LITE400F User Manual

Chapter 3
GETTING STARTED
5POWERING ON OFF THE MOBILE PHONE
Hold the End key for a while to power on the mobile phone. A
power-on animation appears on the display screen.
Input the phone lock code and press the OK key if the mobile
phone prompts you to input the phone lock code. The original
code is 1234.
Input the PIN and press the OK key if the mobile phone
prompts you to input the PIN. The PIN is provided by the
network operator for new opening SIM card.
Enter the standby interface. To power off the mobile phone,
hold the End key for a while.

6 CONNECTING TO THE NETWORK

After the SIM card and the mobile phone are successfully
unlocked, the mobile phone automatically searches for an
available network. After finding a network, the mobile phone
enters the standby state. When the mobile phone is registered
in the network, the name of the network operator is displayed
on the screen. Then you can dial or receive a call.

7 DIALING CALLS

In the standby interface, press number keys to input the area
code and the telephone number, and then press the Dial key to
dial a call. To end the call, press the End key.
Dialing an international call
Press the * key twice can input "+". Then input the country
code, the area code and the telephone number. Finally, press
the Dial key.
USER MANUAL | page 16