Table of Contents
Advertisement
Alert report - voltage error
If a fluctuation in DC power supply to the display's internal components (scaler IC and
backlight) occurs, a voltage error alert report will be generated and sent to the specified
recipient, and the display will turn off automatically. Below is an example of the format and
content of the report.
Voltage Error
[Display]
Model Name: (Model name of the display)
Serial No.: (Serial number of the display)
[STATUS]
Power Status: Power On
Video Source: HDMI1
PAP Enable: Off
[Network]
IP Address: xx.xx.xx.xx
Subnet Mask: xx.xx.xx.xx
Gateway: xx.xx.xx.xx
Primary DNS: xx.xx.xx.xx
Secondary DNS: xx.xx.xx.xx
MAC Address: xx:xx:xx:xx:xx:xx
[Other Information]
Scaler F/W Version: x.x
Lan F/W Version: x.xx Rev x
Operation: 0000008H
If a voltage error alert occurs, consider the following measures:
• Check if there are any loose connections between power cables and sockets.
• Make sure that the power supply is not accidentally turned off (if the power supply device/
outlet has a switch)
Network connection
33
Advertisement
Table of Contents
