5-4. Using the hands-free phone system (for cellular phone)
Select the desired message.
2
Select "Send".
While the message is being sent, a
sending message screen is dis-
played.
To check the message
■
Messages are displayed in the appropriate connected Bluetooth
●
tered mail address folder. Select the tab of the desired folder to be displayed.
Only received messages on the connected Bluetooth
●
When the received message is an e-mail and "Update Message Read Status on
●
Phone" is set to "On", "Mark as Unread" or "Mark as Read" can be selected. Select
"Mark as Unread" to mark mails that have been read on the Bluetooth
unread. Conversely, select "Mark as Read" to mark mails that have not been read
on the Bluetooth
Calling using SMS/MMS message
■
You can call using the SMS (Short Message Service)/MMS (Multimedia Messaging
Service) message sender' s phone number. (→P. 503)
If the message delivery failed
■
If message delivery has failed, a notification will be displayed on the screen.
Select "Retry" to attempt to send the message again or select "Cancel" to cancel.
Editing a quick reply message
■
You can edit the "Quick Reply Messages". (→P. 530)
New message notification
■
If "New Message Pop-up" and "New Message Voice Notification" are set to "On", a
notification appears on the screen and a voice notification will be heard when a new
message arrives, select "Read" to check the message, also to check the message
later, select "Ignore". When "Automatic Message Readout" is set to "On", the mes-
sage will be automatically read out. (→P. 528)
®
phone as read. (→P. 528)
®
phone' s regis-
®
phone can be displayed.
®
511
phone as
5