Table of Contents
Advertisement
Available languages
Available languages
1
INTRODUCTION
Thank you for purchasing LED PAR AURA 64 7x10W RGBW 4in1 ABS. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
3
PRODUCT INFORMATION
3.1
Specification
•
Power consumption: 70W
•
Power supply voltage: 90 - 240V
•
Voltage frequency: 50/60Hz
•
Diode type: 4in1
•
Number of diodes: 7
•
Diode power: 10W
•
Display: LED - 4 characters
•
Color: RGBW
•
ZOOM: No
•
Dimming: Linear: 0 - 100%
•
Flash frequency (min): 1Hz
•
Flash frequency (max): 16Hz
•
FROST filter: No
•
FOCUS: No
•
Number of DMX channels: 5/8
•
DMX standard: DMX 512
•
Control interface: 4 buttons
•
Operating modes: Auto, Sound, DMX
•
AC IN: IEC - C14
•
DMX IN: XLR - 3 pin
•
DMX OUT: XLR - 3 pin
•
IP Rating: IP20
•
Housing made: ABS
•
Cooling: Active
www.flash-butrym.pl
2
Advertisement
Table of Contents
