Continuous Shooting (Continuous Shooting Mode) - Pentax Optio Optio S10 Operating Manual

Continuous Shooting
(Continuous Shooting Mode)
You can switch the Drive mode to [Continuous Shooting] mode. Pictures
are taken continuously while the shutter release button is pressed.
1
Press the four-way controller (2) in Capture mode.
2
Press the four-way controller
(45) to select j (Continuous
Shooting).
3
Press the OK button.
The camera is ready for continuous shooting.
4
Press the shutter release button
halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5
Press the shutter release button fully.
Pictures are taken continuously while pressing the shutter release button.
Shooting stops when you release the shutter release button.
Shutter release button
Four-way controller
OK button
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting Continuous Shooting
MENU Cancel Cancel Cancel
4
OK OK OK
OK
81