Pentax Optio MX Operating Manual page 61

6
Take the first image.
Press the shutter release button to take the
first image. The right edge of the image
appears in semi-transparent form on the left
of the LCD monitor.
7
Move the camera to the right and
take the second image.
Move the camera until the semi-transparent
image and the actual view overlap and
press the shutter release button. Repeat
Steps 6 and 7 to take the third and
subsequent images.
8
Press the OK button.
The screen returns to Step 5.
To cancel Panorama Assist, change to another mode.
• The camera cannot join the images. Use the panorama software
supplied with the camera (ACDSee for PENTAX, ACD
Photostitcher). Refer to the "PC Guide – Enjoying Your Digital
Camera Images On Your PC" for instructions on creating
panorama pictures.
• Continuous shooting is not possible in Panorama Assist.
4
59