Preparing The Remote Control; Operating With The Remote Control - Goodmans GLCD15DVD User Manual

PREPARING THE REMOTE CONTROL

To operate the LCD TV, you must first place the batteries in the remote control.
1. Open the cover.
2. Insert batteries (AAA size).
Make sure to match the + and - on the batteries to the
marks inside the battery compartment.
3. Close the cover.

OPERATING WITH THE REMOTE CONTROL

Operating LCD TV with the remote control.
The remote control must point at the remote sensor in order for the TV to function correctly.
* Do not face the remote sensor towards any light source such as direct sunlight.The TV may malfunction.
INCORRECT USE OF BATTERIES MIGHT CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
!
* Do not place the batteries in the wrong direction.
*It is dangerous to charge/heat/open or short-circuit the batteries.
* Do not leave dead batteries or mix old/new batteries in the remote control.
* When not using the remote control for a long duration of time, remove the batteries.When operating range becomesreduced, replace.
* If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace.
*Take out the batteries when unused for a long time of duration.
-
.6.
Instruction Manual
+
-
+