Download Print this page

Extension Cords - Lynx 63286 Owner's Manual & Safety Instructions

10" cordless pole saw

Advertisement

c. Only use replacement bars and chains
specified by the manufacturer. Incorrect
replacement bars and chains may cause
chain breakage and/or kickback.
d. Follow the manufacturer's sharpening
and maintenance instructions for the
saw chain. Decreasing the depth gauge
height can lead to increased kickback.
19. Use for cutting wood only. Do not use for cutting
plastic, masonry or non-wood building materials.
20.
The battery Charger gets hot during use.
The Charger's heat can build up to
unsafe levels and create a fire hazard if it
does not receive adequate ventilation,
due to an electrical fault, or if it is used in a
hot environment.
Do not place the Charger on a flammable surface.
Do not obstruct any vents on the Charger.
Especially avoid placing the charger on carpets
and rugs; they are not only flammable, but they
also obstruct vents under the charger.
Place the Charger on a stable, solid, nonflammable
surface (such as a stable metal workbench or
concrete floor) at least 1 foot away from all
flammable objects, such as drapes or walls. Keep a
fire extinguisher and a smoke detector in the area.
Specifications
Charger Input Rating
Charger Output Rating 36VDC / 3.3A
Battery Rating
Battery Type
Guide Bar
Saw Chain
Lubrication
Grounding
TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING:
check with a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. Do not modify the power cord plug provided with the charger. Do not use the charger
if the power cord or plug is damaged. If damaged, have it repaired by a service facility before
use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Extension cords

Note: Extension cords must not be used with this item's Charger.
Item 63286
SAVE THESE INSTRUcTIONS.
120VAC / 60Hz
40VDC / 2.5Ah / 90Wh
Li-ion
Replacement - Item 63285
Either Oregon 10" 90 or 91 Sprocket Nose
Either Oregon 10" 90 or 91 Low Kickback
Bar and chain oil (sold separately)
If not available, SAE 30W motor oil may be used
For technical questions, please call 1-888-866-5797.
Frequently monitor the Charger and
Battery Pack while charging.
21. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
22. WARNING: This product contains di (2-ethylhexyl)
phthalate (DEHP), a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5, et seq.)
23. Maintain labels and nameplates on the appliance.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
24. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
3131666
Page 5

Hide quick links:

Advertisement

loading