Lynx 63286 Owner's Manual & Safety Instructions

10" cordless pole saw

Hide thumbs

Table Of Contents

Quick Links

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

10" Cordless pole saw

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2016 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

REV 16g

63286

Table of Contents

Summary of Contents for Lynx 63286

Page 1 Keep this manual and the receipt in a safe and dry place for future reference. REV 16g 10" Cordless pole saw 63286 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
Page 2: Table Of Contents
Follow instructions for lubricating and changing accessories. Keep 7. Avoid Unintentional Starting - handles dry, clean, and free from oil and grease. Do not carry appliance with finger on switch. Page 2 For technical questions, please call 1-888-866-5797. Item 63286...
Page 3 6. Remove or disconnect battery after use, contains important safety and operating before servicing, cleaning or removing instruction for battery charger Model 63286. material from the gardening appliance. 2. Before using battery charger, read all instructions 7. Do not dispose of battery in a fire. The and cautionary markings on battery charger, cell may explode.
Page 4 10. Do not operate pole Saw from within a tree. tip contact and enables better control of the Operation of tool while up in a tree garden power tool in unexpected situations. may result in personal injury. Page 4 For technical questions, please call 1-888-866-5797. Item 63286...
Page 5: Extension Cords
If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Extension cords Note: Extension cords must not be used with this item’s Charger. Item 63286 For technical questions, please call 1-888-866-5797. Page 5...
Page 6 Parts List and Diagram on page 14. Functions chain Guide cover chain Oil Level Gauge Oil Filler Extension Drive Lock cover Hex Wrench/Screwdriver (Located on Handle) Trigger Trigger Safety Lock Page 6 For technical questions, please call 1-888-866-5797. Item 63286...
Page 7: Assembly
Guide Bar’s groove, making sure chain is 8. Tension Saw Chain according to Tension installed in correct rotation direction. Saw chain on page 8. Rotation Guide Direction Drive Groove Symbol Link Item 63286 For technical questions, please call 1-888-866-5797. Page 7...
Page 8: Operation
Pull out to desired length, then move Extension Lock to locked position until it clicks into place. Extension Lock WARNING! To prevent serious injury, check Extension Lock for tightness periodically during use. Page 8 For technical questions, please call 1-888-866-5797. Item 63286...
Page 9 2. There must not be objects, such as utility lines, The work area must not allow access by children nearby that will present a hazard while working. or pets to prevent distraction and injury. Item 63286 For technical questions, please call 1-888-866-5797. Page 9...
Page 10 7. Cut lower branches first. 8. Do not force Pole Saw, let Pole Saw do the work. Trigger 9. Remove the Pole Saw from a cut while it is running. Page 10 For technical questions, please call 1-888-866-5797. Item 63286...
Page 11 Pull extension pole back in, then move Extension Lock to locked position until it clicks into place. c. Clean, then store according to cleaning, Maintenance and Lubrication on page Item 63286 For technical questions, please call 1-888-866-5797. Page 11...
Page 12: Maintenance
WARNING! This tool comes with either Oregon 90 or 91 Guide bar and Saw chain. When replacing Guide bar, make sure the replacement matches the Saw chain. Page 12 For technical questions, please call 1-888-866-5797. Item 63286...
Page 13 Guide Bar is worn and needs to be replaced. Saw Chain. If there is a gap, the bar is normal. Tilting Saw chain Ruler chain Ruler Rail Worn Guide bar Straight Guide bar Item 63286 For technical questions, please call 1-888-866-5797. Page 13...
Page 14: Parts List
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 63286...
Page 15: Assembly Diagram
Assembly Diagram Item 63286 For technical questions, please call 1-888-866-5797. Page 15...
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.