Pc Mode - Pentax EL-100 Operating Manual

DELETE MENU
DELETE CURRENT?
DELETE ALL?
DELETE CURRENT:
Deletes the selected image.
Select the DELETE CURRENT? item by arrow
buttons ( / ) and then press the OK button.
The image appears on the LCD monitor.
Select the image you wish to delete by the
arrow buttons (
delete the selected image.
To return to the DELETE menu without any deletion,
press the MENU button.
DELETE ALL:
Deletes all the captured images.
Select the DELETE ALL item by the arrow
buttons ( / ) and then press the OK button
to confirm.
Use the arrow buttons (
selection. Select DELETE and press the OK
button to proceed the deletion and return to
the DELETE menu. A NO PICTURE message
in the DELETE menu after the deletion. Select
CANCEL, then press the OK button to cancel
20
/ ). Press the OK button to
/ ) to toggle the
and return to the DELETE menu without any
deletion.

PC Mode

Images can only be transferred to a PC via USB
in this mode.
Connect the USB cable (I-USB4) in the fol-
lowing steps
Confirm that the USB driver has been installed
in your PC.
1. Connect one end of cable to your PC.
2. Turn the camera ON and set the mode dial
to PC.
3. Connect the other end of cable to the
camera.
Disconnection of the USB cable
For Windows 2000/Me:
On the main menu, left click twice on the icon
with green arrow on the task tray and follow
the instructions of the displayed screen.
For Windows 98:
Unplug the cable from the PC. Unnecessary
for above mentioned procedures.