Loading The Compactflash Card (Optional); Attaching The Strap; Setting The Language; Setting The Date And Time - Pentax EL-100 Operating Manual

Loading the CompactFlash Card
(Optional)
Capture images can be stored in the Internal
memory of the camera or the CF card.
To load the CF Card, perform the following.
1. Turn off the camera.
2. Open the CF card slot cover and then insert
a CF card as indicated by the arrow.
3. Close the CF card slot cover.
Turn on the camera, LED2 will light up.

Attaching the Strap

1. Insert the thin end of the strap into the strap
lug.
2. Pass the other end of the strap through the
loop of thin cord and pull the strap tight.
10

Setting the Language

Set the Operating Mode Dial to SETUP. When the
camera is turned on for first time, SETUP menu
appears. To set your desired language, follow the
procedures How to set the OSD language? On
page 14.

Setting the Date and Time

Switch to SETUP mode and then power on the
camera, the Setup menu appears.
Press the OK button to select DATE/TIME. The
cursor skips to the last field as the OK button
being pressed. Use the arrow buttons (
to make the change. For more details, please
refer to page 18.
/ )