Panasonic EB-GD93 Service Manual page 29

4.2.3 Access to Printed Circuit Boards
1. Remove the case as described previously. While applying slight pressure to the side retaining clips, lift the Main PCB away
from the chassis.
2. While applying slight pressure to the side retaining clips, slide the Keypad PCB towards the bottom (I/O) connector until it
is released from the chassis.
3. Insert a small screwdriver blade or similar blunt object into the chassis recess to the side of the LCD, and gently prise the
LCD from the chassis assembly.
4. The Light Guide and Reflector can be removed in turn by prising one side away from the chassis.
MCUK001002C8
Service Manual
DISASSEMBLY / REASSEMBLY INSTRUCTIONS
Figure 4.5: Main PCB Removal
Figure 4.6: Key PCB Removal
Figure 4.7: LCD Removal
Section 4
– 23 –
10195-1
10196-1
10226-1
Issue 1
Revision 0