Advertisement
Fully
A
u
t o m a t i c
Fully
A u t o m a t i c
m
m
c
c
Suitable for both new,old,dirty,tattered polymer bills and paper bills
oney
oney
ounter
ounter
<Figure 1>
<Figure 2>
Steps:
1. Loosen the protector screw (using a screwdriver) as shown in figure 1
2.Turning clockwise the adjustor screw to tighten the feeding hopper, shown in figure 2.
3.Turning counter clockwise the adjustor screw to loosen the feeding hopper, shown in figure 3.
4.After adjusting the correct level and counting performance is normal, tighten the protector screw (using a screwdriver), shown in figure 4.
When adjusting the bill thickness adjustor screw does not solve the problem of improper bill
feeding, you may need further help by.authorized service center.
Hand-hold a note. Put it inside the counting roller and resistant rubber. (see the picture).
To test the tensile force. Clockwise direction is tighten, counter-clockwise direction is loosing.
7
<Figure 3>
<Figure 4>
Tensile force test.
Fully
A
u
t o m a t i c
Fully
A u t o m a t i c
m
m
c
c
Suitable for both new,old,dirty,tattered polymer bills and paper bills
oney
oney
ounter
ounter
10.Counting roller replacement
When the counting roller damaged, it will cause counting not fluently or
correct. Open the top cover, loosing the screw of roller axis machine.
Replaced old roller. Then fix the machine inside.
New roller
Old roller
11.Maintenance
-Do not operate the unit in areas with high temperature or high humidity
since it may damage the machine.
-When not using the unit for a long period of time, remove the power plug
from the wall outlet.
-Never operate the unit under strong light.
-Clean the machine frequently after switching off and unplugging of the
machine.
-Do not use this product in areas where it may be exposed to water or
other liquids.
-Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaner. Use a brush or a damp cloth for
cleaning.
12.Specification
Dimension :
298mmX 240mmX 198mm
Banknote Size :
Min50 x 100, Max: 80 x 170mm
Net Weight :
4.5kgs
Gross Weight :
5.0kgs
≥1050pcs/min
Counting Speed :
Batch Range :
1-100
Counting Display :
LCD display or LED display
Power Supply :
DC85-250V
Power Consumption : ≤70W
13.Special function
1.With chargeable battery (Optional)
8
Advertisement
