Digital Set-top Box Special features
•
Suitable for DVB-T reception coverage area
•
Receives both VHF & UHF signals
•
Contains digital decoder & twin tuners
•
Digital decoder will automatically performs error correction, which increases
Signal to Noise (S/N) ratio and reception capacity
•
Supports both 4:3 and 16:9 image ratio
•
Receives Standard digital TV programs
•
Provides Electronic Program Guide (EPG) function
•
CD quality sound, 24 bit processing for stereo sound output
•
High quality DVD image
•
Please use the standard 75 Ohm antennas designed for digital TV. This machine
provides a +5V DC power used by the antenna. The power can be used by an ac-
tive antenna.
•
If the antenna used has an impedance lower than the standard 75 Ohm or has
short-circuited, the screen will display an "antenna power overload" warning
message. Please eliminate the antenna short-circuit or exchange it for a standard
digital TV antenna.
•
If no programs can be received, please check first if the antennas are standard
DVB-T antennas and if they are connected properly. Use the signal strength
indicator and signal status to make appropriates adjustments to the antenna po-
sition. If necessary, use the auto scan button to re-scan all channels. Still, if no
programs can be received, then the receiver is probably outside the coverage
area. Move the receiver to a new location and re-scan. Details about coverage
areas can be found from digital broadcasting organisation websites.
SPECIAL ATTENTION
III