Advertisement
DIPSWITCH SETTINGS
The Dipswitch has 3 switches which are used for setting up the keypad.
Switch 1: Is used for factory reset, this will return the keypad to factory
settings -
warning
this will delete all 4 digit codes and reset the administration
code to #12345#
Switch 2: This will reset the administration 5 digit number only, back to
#12345#
Switch 3: Keypad backlight ON//OFF
To activate Dipswitch 1
1. Turn OFF the power
2.
Turn ON Dipswitch 1
administration code to #12345#)
3. Turn ON the power
The DX-60 keypad will now reset itself, you will hear a beep and the keypad
lights will flash, wait a few seconds and then turn OFF Dipswitch 1 to continue
To activate Dipswitch 2
1. Turn OFF the power
2. Turn ON Dipswitch 2
3. Turn ON the power
The DX-60 keypad will now reset only the administration number, you will hear
a beep and then the keypad lights will flash, wait a few seconds and then turn
OFF Dipswitch 2 before you can continue - The admin code will number be
#12345#
To activate Dipswitch 3
● When dipswitch 3 is set to ON the keypad back lighting will be off
● When dipswitch 3 is set to OFF the keypad back lighting will be on
For more technical information please contact us, we offer full pre and post
sales support or browse the FAQ's section on
Phone
0800 246 1583
Email
gsmswitch@hotmail.co.uk
(warning
this will delete all 4 digit codes and reset the
Page 4
http://www.gsm-activate.co.uk
Advertisement
