Chapter 4
3 )
PPPoE:
By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Save
and then click Connect.
Note:
If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please uncheck the box for
same session with IPv4 connection
4 )
6to4 Tunnel:
connection type
input further information if your ISP requires. Click
Advanced
to input further information if your ISP requires. Click
and manually enter the username and password for the IPv6 connection.
An IPv4 Internet connection type is a prerequisite for this
(Manually Set up Your Internet
Set Up Internet Connection
Connection). Click
Advanced
Save
and then click Connect.
Use the
to
18