Maintenance When Trailer Towing; Trailer Wiring Harness - GMC Chevrolet SSR 2003 Owner's Manual

Maintenance When Trailer Towing

Your vehicle will need service more often when you're
pulling a trailer. See Scheduled Maintenance on
page 6-5 for more information. Things that are especially
important in trailer operation are automatic transmission
fluid (don't overfill), engine oil, axle lubricant, belt,
cooling system and brake system. Each of these is
covered in this manual. If you're trailering, it's a
good idea to review these sections before you start
your trip.
Check periodically to see that all hitch nuts and bolts
are tight.

Trailer Wiring Harness

The trailer wiring is a four-wire harness assembly. The
wires are blunted and taped to the wiring harness.
The harness and wiring are stored under the vehicle on
the driver's side. The harness has no connector and
should be wired by a qualified electrical technician. The
technician can use the following color code chart
when connecting the wiring harness to your trailer.
•
Black: Ground wire.
•
Yellow: Left turn lamps.
•
Dark Green: Right turn lamps.
•
Brown: Parking lamps.
Securely attach the harness to the trailer, then tape or
strap it to your vehicle's frame rail. Be sure you
leave it loose enough so the wiring doesn't bend or
break, but not so loose that it drags on the ground. Store
the harness in its original place. Wrap the harness
together and tie it neatly so it won't be damaged.
4-49