Cable Inspection And Lubrication; Brake And Shift Pedal/Brake Lever Lubrication; Knuckle Shaft And Steering Shaft Lubrication - Yamaha YFM80GV Owner's Manual

7. Install the left footboard by installing the
screws and bolts, and then tighten the
bolts to the specified torque.
Tightening torque:
10 Nm (1.0 m0kgf)
EBU00570

Cable inspection and lubrication

w
Inspect cables frequently and replace if dam-
aged. Corrosion can result when the outer
covering of control cables becomes dam-
aged. Cables can also become frayed or
kinked. Operation of controls could be
restricted, which could cause an accident or
injury.
Lubricate the inner cables and the cable ends. If
the cables do not operate smoothly, ask a
Yamaha dealer to replace them.
Recommended lubricant:
Engine oil
EBU00727

Brake and shift pedal/brake lever lubrication

Lubricate the pivoting parts of each lever and
pedal.
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
EBU01220

Knuckle shaft and steering shaft lubrication

Lubricate the pivot points using a grease gun.
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
1
1. Grease nipple
8-22
1