Hardware Installation - Chacon 34546 Quick User Manual

Hardware installation

a
b
FAQ
Forget Username / Password
Restore camera back to factory settings:
1. Press «Reset» button for about 10 seconds with camera powered on.
2. Release the button and wait about 30 seconds, the camera will
automatically restart, and restore factory settings with its username /
password recovery to admin / (1234).
Please Note:
After restore to factory default settings, you need to cong the Wi-Fi
connection again, you can follow the Setup Wizard of the App to add again.
In case your device failed to add by Wi-Fi, you can use WPS or wired
connection. please refer to the User Manual on the CD.
EN FR
1. Rotate the base of the camera until points a and
bare aligned, this allows for the mounting plate to be
a
removed.
2. Install the mounting plate on a wall or ceiling with
b
supplied xing screws.
3. Align points a and b to insert the camera base to
the mounting plate. Rotate so that points a and b are
no longer aligned, this attaches the camera securely
to the base.