Adjustable Rapid Fire Modes; Programming Adjustable Rapid Fire Modes - GamerModz xbox One – SPS-X3 Instruction Manual

Your GamerModz SPS-X3 Controller comes with 5 Programmable Modes - Modes 1 thru 5. To program a Mode,
you must first select the mode (Reference "Toggle Between Rapid Fire Modes" on Page 2).
Once you are in the Mode you wish to Program (Only applies to Modes 1 thru 5) follow the instructions below
to Program that Mode. Your GamerModz SPS-X3 Controller will remember the Re-Programmable Mode settings
even after you turn your controller off. Please Note: You must be in Right Trigger Mode (Default) to Program
an Adjustable Rapid Fire Mode.

Programming adjustable Rapid fire modes

Once you are in the Mode you wish to Program, Hold Down the Right Trigger
Pad until the LED begins to flash. Release both the Right Trigger
Hold
Once in Programming Mode you can adjust your shots per second by Tapping Up on D-Pad
Shots per Second and by Tapping Down on the D-Pad
you Tap the D-Pad, your Rate of Fire will Increase or Decrease 1 Shot per Second.
To test the Rapid Fire Rate, fire your weapon by pulling the Right Trigger
Tapping Up or Down
see graph on Page 4 for Reference.
Once you have the desired Rapid Fire Setting, Tap Right on D-Pad
One LED will flash the number times corresponding to your rate of fire and then return to heartbeat flashes. For
Example: 12 Shots per Second, The LED will flash 12 times, then return to heartbeat flashes.
= Increase Rate of Fire
GamerModz
Adjustable rapid
Fire modes
, then
on the D-Pad until the desired smoothness and rate of fire is achieved. Please
XBOX One – SPS-X3 Ver 3.0
Hold
Until LED
, then
Begins to Flash
to Decrease Shots per Second. Note: Each time
to lock in the rate of fire. The XBOX
= Decrease Rate of Fire
, then Hold Down Right on D-
and Right on D-Pad
Release
to Increase
. Adjust your Rapid Fire Rate by
= Lock Rate of Fire
.
3