PIAGGIO NRG Power Purejet Workshop Manual page 122

pure jet injection
6. The diagnostic tester is ready for use. The selected software will stay in memory also for the next
uses
N.B.
IF THE SCOOTER DIAGNOSTIC TESTER IS NOT LOADED WITH THE SYSTEM SOFTWARE, UP-
GRADE WITH A PC, THE PROGRAMMING KIT AND THE SOFTWARE TO LOAD. SET THE
DIAGNOSTIC TESTER TO FUNCTION «LINK TO PC» IN THE MENU.
The main menu of the diagnostic tester has the following functions:
• PARAMETERS
• ERRORS
• PARAMETERS STORED
• ERROR CLEARING
• ACTIVE DIAGNOSTIC
• TPS RESET
• CALIBRATION
• ECU INFORMATION
To access the individual functions, the tester must be connected to the vehicle diagnostic outlet and
the ECU must be on.
• To connect the scooter diagnostic tester, raise
the seat
• Remove the left detail shown in the figure
• Extract the grip from the support clip
INJ PJ - 6
NRG Power Purejet