Applying The Brakes; Adjusting The Backrest - Kiddicare Triple Instruction Manual

Fitting and Removing the Front Wheels
6
fig. 13 fig. 14
To fit the front wheels, push the wheels onto the front legs until they click into place
(fig.13 & 14).
To Remove, squeeze both clips, whilst pulling the wheel off the leg (fig.15).
Using the Front Swivel Wheels
Lock
fig. 16 fig. 17
To lock the swivel wheels, first ensure the front wheels are facing forward inline with the
chassis, then lift the lever up (fig.16).
To put the wheels in swivel mode, push the lever down on the front of each front wheel
(fig.17 & 18).
www.kiddicare.com
fig. 15
Release
fig. 18
Lock
fig. 19
To lock the brakes fully, push down on each brake lever using your foot (fig.19).
To release the brakes, lift each brake lever using your foot (fig.20).
Apply the brake before putting your child into the pushchair.
Apply the brake when the pushchair is stationary.
Press
fig. 21 fig. 22
To recline the backrest, press the button on the backrest release toggle and pull away
from the seat to the desired height (fig.21). Lower the seat to rest on the toggle (fig.22).
To put upright, grip the sides of the toggle with one hand, and the strap with the other
hand and slide the toggle up the strap to the desired height (fig.23).
www.kiddicare.com

Applying the Brakes

Release
fig. 20

Adjusting the Backrest

fig. 23
7