Setting The Alarm - capello Ci200 User Manual

notes: The display normally shows the "FM" icon and the clock time. The preset number ("P##") or frequency
will be shown for 5 seconds while tuning before again showing the clock time.
Press the TUNE UP / SKIP / SEARCH
display the current frequency and then tune up or down.

setting the alarm

Press and hold either the ALARM 1 (to set Alarm 1) or ALARM 2 (to set Alarm 2) button and the alarm hour will blink
on the display.
Press the TUNE UP / SKIP / SEARCH
Mark sure AM/PM is set correctly. Press the ALARM 1 button (when setting Alarm 1) or the ALARM 2 button
(when setting Alarm 2) and the minutes will blink. Press the TUNE UP / SKIP / SEARCH
SEARCH button to set the minute. Press the ALARM 1 (when setting Alarm 1) or ALARM 2 button (when setting
Alarm 2) and the volume level will appear.
Press the VOLUME UP + or VOLUME DOWN – button to set the maximum alarm volume level. Press the ALARM 1
(when setting Alarm 1) or ALARM 2 (when setting Alarm 2) button and the alarm source mode will appear.
Press the TUNE UP / SKIP / SEARCH
source: buzz, iPod/iPhone, FM Radio or Nature Sound. Press the ALARM 1 (when setting Alarm 1) or ALARM 2 (when
setting Alarm 2) button to con rm the setting. "ALARM 1" or "ALARM 2" will appear in the display to indicate it is set.
If you selected Nature Sound as the alarm source (in Step 4), select your desired Nature Sound using the TUNE UP /
SKIP / SEARCH or TUNE DOWN / SKIP / SEARCH
3 – White Noise, 4 – Ocean Surf, 5 – Gentle Breeze. The number will be shown on the display.
Press the ALARM 1 or ALARM 2 button, respectively, to toggle the alarm on/off. If the alarm is on, then "ALARM1"
or "ALARM 2" and the selected alarm source will appear on the display.
or TUNE DOWN / SKIP / SEARCH
or TUNE DOWN / SKIP / SEARCH
or TUNE DOWN / SKIP / SEARCH
button : 1 – Forest Sounds, 2 – Rain Drops,
buttons during clock time to
button to set the alarm hour.
or TUNE DOWN / SKIP /
button to select the desired alarm