Rear Axle - Sd80, Pd70 - Renewing The Pinion Oil Seal - jcb 214e Service Manual

www.WorkshopManuals.co.uk
Section F Transmission Section F
51 - 1
51 - 1 Service Procedures
Rear Axle - SD80, PD70
Renewing the Pinion Oil Seal
The rear axle pinion oil seal is renewed using the same
procedure as Front Axle SD55, SD70 but note the following:
The rear axles are fitted with a brake disc/drive flange in
place of the yoke on front axles. For the brake disc removal
procedure see Section G, Brakes, Service Procedures.
9803/3280 Issue 1
Purchased from www.WorkshopManuals.co.uk