Philips 220S2CB/00 Service Manual

22'' lcd color monitor

Hide thumbs Also See for 220S2CB/00:

User manual (53 pages)

Table of Contents

Quick Links

Chapters

Table of Contents

Summary of Contents for Philips 220S2CB/00

Page 1: Table Of Contents
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES Copyright 2010 Philips Consumer Lifestyle Subject to modification ○ Mar.11, 2010...
Page 2: Revision List
Revision History Mar.11,2010 Initial release, Draft Version Add SEC panel for 220S2SB/00 Mar.20,2010 Add CTN model 220S2CB/75 Add CTN model 220S2CB/00, 220S2CB/27, 220S2CB/69, 220S2CB/93, 220S2SB/93 and 220S2SS/00 May.04,2010 Update BOM for 220S2SB/75 May.22,2010 Update BOM for 220S2SB/27 and 220S2CB/00 Jun.29,2010...
Page 3: Important Safety Notice
Meridian 2 Important Safety Notice Proper service and repair is important to the safe, reliable operation of all Philips Company Equipment. The service procedures recommended by Philips and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose.
Page 4: Monitor Specifications
Meridian 2 1. Monitor Specifications Technical specifications Picture/Display LCD Panel Type TFT-LCD Backlight CCFL Panel Size 22″ W (55.9 cm) Aspect Ratio 16:10 Pixel Pitch 0.282 x 0.282 mm Brightness 250 cd/m² SmartContrast 50000:1 Contrast Ratio (typical) 1000:1 Response Time (typical) 5 ms Optimum Resolution 1680 x 1050 @ 60Hz...
Page 5 Compliance and standards CE Mark, Energy Star 5.0, FCC Class B, SEMKO,TCO5.0,TÜV/ Regulatory Approvals GS,TÜV Ergo, UL/cUL Cabinet Color Black/Sliver, Black/Black Finish Texture Note: This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
Page 6: Lcd Monitor Description
Meridian 2 2. LCD Monitor Description The LCD monitor will contain a scaler board, a power board, a LED board and a key board. The scaler board houses the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the scaler board chips each voltage.
Page 7: Operation Instructions
Meridian 2 3. Operating Instructions 3.1 General Instructions Connecting to your PC Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (see figure). By changing these setting, the picture can be adjusted to your personal preference.
Page 8: Osd Menu
3.3 OSD Menu On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 9: Input/Output Specification
Meridian 2 4. Input/ Output Specification 4.1 Input Signal Connector Analog connectors Signal Name Signal Name Pin No. Pin No. DDC +3.3V or +5V Green/ SOG Logic GND Blue Sense (GND) Sense (GND) Bi-directional data Cable Detect (GND) H/H+V sync Red GND V-sync Green GND...
Page 10: Resolution & Preset Modes
Meridian 2 4.2 Resolution & Preset Modes Maximum Resolution 1680 x 1050 at 60 Hz (analog input) 1680 x 1050 at 60 Hz (digital input) Recommended Resolution 1680 x 1050 at 60 Hz (digital input) Resolution H. freq (kHz) V. freq (Hz) 640x350 31.469 70.086...
Page 11: Pixel Defect Policy
No manufacturer can guarantee that the monitor displays a dark pattern. There are three panels will be free from pixel defects, but Philips types of bright dot defects: guarantees that any monitor with an unacceptable...
Page 12 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Page 13: Failure Mode Of Panel
Meridian 2 4.4 Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
Page 14: Block Diagram
Meridian 2 5. Block Diagram 5.1 Scaler Board Keypad Interface Panel Interface (CN402) (CN301) Scaler IC NT68668FG Flash Memory Crystal PM25LV020-100SCE (Include MCU, ADC, OSD) 12MHz (U402) (U401) (X401) EEPROM EEPROM H/Y Sync AT24C02BN AT24C02BN (U102) (U101) EDID_WP EDID_WP RX+/- DDCSCL2 DDCSCL1 RXC+/-...
Page 15: Power Board
Meridian 2 5.2 Power Board AC input Bridge Rectifier Transformer EMI filter Rectifier Diodes and Filter Photocoupler (IC903) PWM Control TOP266 Feedback (IC901) Circuit Output MOSFET Transformer Circuit (PT801) AO4614 Lamp Protect Circuit PWM Control Ta9687 ON/OFF (IC801) Feedback Circuit...
Page 16: Schematic Diagram
Meridian 2 6. Schematic 6.1 Scaler Board (715G3737M0D0000H4K) 04.SCALER 02.INPUT VCC3.3 VCC3.3 SOG_DET VCC1.8 SOG_DET SOG_DET VCC1.8 05.PANEL INTERFACE EDID_WP AHS0 EDID_WP AHS0 AHS0 AVS0 AVS0 AVS0 PA[0..9] DDCSDA1 DDCSDA1 DDCSDA1 PA[0..9] PA[0..9] DDCSCL1 DDCSCL1 DDCSCL1 VGA_CABLE_DET VGA_CABLE_DET VGA_CABLE_DET PB[0..9] 02.D-SUB INPUT PB[0..9] PB[0..9]...
Page 17 Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. D-SUB CN101 DET_VGA R102 100R 1/16W 5% VGA_CABLE_DET VGA_CABLE_DET 5 DB15 VGA_5V DDCSCL1 R101 DDCSCL_A DDCSCL1 100R 1/16W 5% VGA_5V VSIN0 BIN0- HSIN0 BIN0 R103 R104 R105 C102 GIN0-...
Page 18 Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. R127 DVI_CABLE_DET 5 100R 1/16W 5% DVI5V CN102 3,5,7 VSY NC DET_DVI DVI5V SYNC GND SCL_DVI R128 100R 1/16W 5% D102 DDC SCL SDA_DVI R129 100R 1/16W 5% ESD_DVI BAV70 DDC SDA...
Page 19 Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. VCC1.8 FB401 CVDD Scaler 300OHM CN401 PB[0..9] PB[0..9] LVB3P R402 NC/2K2 1/16W 5% LVB3M R403 NC/2K2 1/16W 5% C401 C402 C403 LVBCKP VCC3.3 LVBCKM 0.1uF 25V 0.1uF 25V 0.1uF 25V LVB2P...
Page 20: Panel Interface
Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. Panel Interface PA[0..9] PB[0..9] PA[0..9] PB[0..9] LVB3P CN408 LVA3P LVB3M CONN LVA3M LVBCKP LVB0M RXO0- LVACKP LVBCKM LVB0P RXO0+ LVACKM LVB2P LVB1M RXO1- LVA2P LVB2M LVB1P RXO1+ LVA2M LVB1P...
Page 21 Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. VCC3.3 U701 Power 3,4,5 VCC3.3 5 VIN VOUT VCC3.3 C703 C704 0.1uF 25V C702 0.1uF 25V C701 R702 100uF16V 10K 1/16W 5% 0.1uF 25V +5V 3,4,5 CN701 R703 1K 1/16W...
Page 22: Power Board
Meridian 2 6.2 Power Board (715G3974P01000001S) Remark: Parts position can be searched by using FIND function in PDF. R918 100 OHM 1/4W L904 C912 C910 R919 100 OHM 1/4W BD901 +16V Coil C900 R920 D2SB80 3300PF/250V 100 OHM 1/4W 1000P 500V 1000P 500V R947 R946...
Page 23 Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. R817 2R2 +-5% 1/8W +16V Q805 ON/OFF G1 D1 R816 2R2 +-5% 1/8W D803 R803 1N4148 D802 5.1K 1/8W R804 PT801 AO4614 1N4148 5.1K 1/8W POWER X'FMR C815 100N 50V CN802...
Page 24: Led Board
Meridian 2 6.3 LED Board (715G3997T01000004F) Remark: Parts position can be searched by using FIND function in PDF. CN002 LED001 CONN...
Page 25: Key Board
Meridian 2 6.3 Key Board (715G3996K01000004S) Remark: Parts position can be searched by using FIND function in PDF. CB001 VCC3.3 POWER CS_5 CAPACITIVE BUTTON R001 10K1/16W U001 CB002 CS_6 CS_2 SmartImage \ down ALERT# CS_3 ALERT I2C_SDA CS_4 SDAT CAPACITIVE BUTTON VCC3.3 I2C_SCL CS_5...
Page 26: Pcb Layout
Meridian 2 7. PCB Layout 7.1 Scaler Board (715G3737M0D0000H4K) Remark: Parts position can be searched by using FIND function in PDF. R707 C701 CN409 CN406 C711 U704 CN408 C705 C434 C713 FB409 R449 FB401 C710 C433 R448 U702 C702 Q704 C716 FB405 CN701...
Page 27 Meridian 2...
Page 28: Power Board
Meridian 2 7.2 Power Board (715G3974P01000001S) Remark: Parts position can be searched by using FIND function in PDF. SCR2 J902 J901 SCR1 CN903 R947 C915 L801 R946 L903 L904 ZD902 F903 J806 CN902A L905 C819 CN801 D906 C918 C917 C916 CN902 J807 F902...
Page 29 Meridian 2 Remark: Parts position can be searched by using FIND function in PDF. C810 R843 D806 D807 R838 R842 C813 R943 Q802 D805 R813 C808 R808 C809 IC801 R815 C805 C910 C912 C935 C818 C812 C929 R962 C806 R961 R935 C924 R927...
Page 30: Led Board
Meridian 2 7.3 LED Board (715G3997T01000004F) Remark: Parts position can be searched by using FIND function in PDF. LED001 CN002...
Page 31: Key Board
Meridian 2 7.4 Key Board (715G3996K01000004S) Remark: Parts position can be searched by using FIND function in PDF. CN001 CN21 CN20...
Page 32: Wiring Diagram
Meridian 2 8. Wiring Diagram Panel FFC Cable CN802 CN408 Power Board NT68668FG (U401) Scaler Board CN803 CN901 CN102 CN101 D-SUB AC IN LED Board CN002 Key Board CN001...
Page 33: Scaler Board Overview
Meridian 2 9. Scaler Board Overview DC-DC Scaler IC Flash EEPROM D-SUB EEPROM DVI EEPROM...
Page 34: Mechanical Instructions
Meridian 2 10. Mechanical Instructions Step 2: Remove the rear cover 1. Open the latches and along the red arrowhead direction as the picture to open other latches Step 1: Remove the stand-base ass’y 1. Place the monitor face on a safe surface, and remove the 4 screw covers.
Page 35 Meridian 2 Step 3: Remove the bezel 1. Disconnect the connector and remove the screws to 2. Disconnect the connectors. remove the LED board. 2. Disconnect the connector to remove the key board. 3. Press to release left and right latches of LVDS cable and disconnect the LVDS cable.
Page 36 Meridian 2 Step 5: Remove the boards 1. Remove the Main Board 3. Disconnect all the connectors. 2. Remove the Power Board...
Page 37: Repair Flow Chart
Meridian 2 11. Repair Flow Chart 1. No Power No power Check power cable is Re-plug the power cable tightened? Check Power “On/Off” Turn on the Power “On/Off” switch is “On”? Check the LED Check the AC power indicator is OK? Replace the power board and check connections Replace main board and check connections Replace key board and check connections...
Page 38 Meridian 2 Video (Power LED White) No Video (Power LED White) Press the power Replace the main board button is OK? Replace the power The end board and connection Replace the main The end board and connection Check the LVDS/FFC Replace the LVDS/FFC cable or panel cable or panel...
Page 39 Meridian 2 DIM (image overlap, focus or flicker) Reset in factory mode The end Set to the optimal The end frequency, select the recommended frequency Readjust the phase and pixel The end clock in the user mode Pull out signal cable and Check the signal cable check “Self Test Feature and the PC...
Page 40 Meridian 2 4. Color is not optimal Color is not optimal Color shift Miss color Reset the factory mode Replace the signal cable In the user mode, set the” color settings” until customer satisfy The end Pull out the signal cable and check the screen color display is normal? Replace the signal cable or PC...
Page 41: Isp Instructions
12.1 Install the “PORT95NT” and “EasyUSB WriterV4.4” , and then restart the computer. 12.2. Connect the ISP board as follow: Connect to DC 12V Input the PC LPT Connect this port to the Philips model VGA port 12.3 The process of ISP writing as follows:...
Page 42 Meridian 2 a. Double-click to running the program as follows: b. Judge the monitor whether belong to “data in flash” or not, if belong to it, please click “option” item and select “FE2P Mode Enable”, otherwise, don’t do any actions. Like as below picture:...
Page 43 Meridian 2 c. Click “option” and select “Setup ISP tool ”, d. Select “NVT Type I (default)”, and then click the icon “Confirm Change”.
Page 44 Meridian 2 e. Click icon, search the correct program, and then click open: f. Click icon. After display “Chip erase OK.”, “Programing Success”, “ISP OFF”, it means F/W updated OK, it will show as the follow picture:...
Page 45: Ddc Instructions
The process of installing “PORT95NT” has been specified in, so it will not be specified again. If you have any problem, please read it. 13.2 Connect the DDC Board as follow: Connect this port to the Philips model DVI-D port Connect to the PC LPT Connect this port to the Philips model VGA port...
Page 46 Meridian 2 1. Rename the EDID data to “wa”, “wd”. 2. Put the “wa” and “wd” into a new folder, and then create another new folder named “ddc” (It must be “ddc” instead of other names). Step1: Must put the “ddc” folder, “TPVDDC5.6.exe” into the same folder. Step2: Must copy EDID data and “config”...
Page 47 Meridian 2 3. Double-click ,appear as follow: 4. Click “LoadFile”, it will show the picture as follow:...
Page 48 Meridian 2 5. Click “OK”, it will show the picture as follow: 6. Key in the same 14 numbers in the Input SN and Verify SN.
Page 49 Meridian 2 7. Click “Program”, when the DDC Write complete, it will show the picture as follow: 8. Click “ReadBoth”, if the DDC Write is OK, it will show the picture as follow:...
Page 50 Meridian 2 220S2 EDID Analog 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C 86 08 BD E6 04 00 10| 01 00 01 03 68 2F 1E 78 2A 78 F1 A6 55 48 9B 26 20| 12 50 54 B7 4B 00 81 80 95 00 95 0F B3 00 01 01 30| 01 01 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0 40| 36 00 D9 28 11 00 00 1C 00 00 00 FF 00 32 33 31...
Page 51 1440 x 900 @ 60Hz 1440 x 900 @ 75Hz 1680 x 1050 @ 60Hz <-Detailed Timing Descriptions: -> FC (Monitor Name): Philips 220S FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.
Page 52 Meridian 2 Digital 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C 86 08 BD E6 04 00 10| 01 00 01 03 80 2F 1E 78 2A 78 F1 A6 55 48 9B 26 20| 12 50 54 B7 4B 00 81 80 95 00 95 0F B3 00 01 01 30| 01 01 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0 40| 36 00 D9 28 11 00 00 1C 00 00 00 FF 00 32 33 31...
Page 53 1440 x 900 @ 60Hz 1440 x 900 @ 75Hz 1680 x 1050 @ 60Hz <-Detailed Timing Descriptions: -> FC (Monitor Name): Philips 220S FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.
Page 54: White Balance, Luminance Adjustment
Meridian 2 14. White Balance, Luminance Adjustment 1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (PHILIPS 220S2.DDCI), Pattern generator. 2. Equipment installation: a. Connect analyzer CA-210 to PC by USB connector, install drive program CA-SDK Ver4.00 for CA-210 and restart PC after finish installing b.
Page 55 Meridian 2 5. Color Temp confirmation Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC. 6.
Page 56: Monitor Exploded View
Meridian 2 15. Monitor Exploded View...
Page 57: Recommended & Spare Parts List
AC POWER CORD 1800MM EUROPE Reg. SCREW FOR STD/MF FQ415 0M1G1740 8120 42-D020715/42-D000649() FQ205 705GQACS006 CUSHION ASSY FQ202 Q44GC133813 1A 22 PHILIPS LCD CARTON FQ210 Q45G 88606 R PE BAG FOR BASE FQ203 Q45G 88609206 EPE BAG E08907 S89G179T30N521 FFC CABLE...
Page 58 Meridian 2 U102 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS IC903 056G 139 7 IC EL817MC M-TYPE T901 080GL19P 11 S XFMR FOR POWER 650uH 10% PT801 080GL20T 43 H INVERTER XFMR 80UH 12% 54D-9084 IC904 056G 158 12 KIA431A-AT/P TO-92 F901 084G 56 4 B...
Page 59 Meridian 2 C905 067G 40Z10115L EC 100uF 450V M 18*36mm C916 067G204V102 2C CAP CS 1000UF 20% 10V 10*12 C916 067G204V102 2K CAP CS 1000UF 20% 10V 10*12 C908 067G215R2207KV LOW ESR EC 22uF 50V M 6.3*11mm EC 105℃ CAP 470UF M 16V C915 067G215S4713KV C915...
Page 60 Meridian 2 R809 061G0603105 JY RST CHIP 1M 1/10W 5% YAGEO R815 061G0603153 JF RST CHIPR 15KOHM 5% 1/10W FENGHUA R808 061G06033900FY RST CHIPR 390 OHM +-1% 1/10W YAGEO R842 061G0603471 JT RST CHIPR 470OHM +-5% 1/10W TZAI YUAN R838 061G0603471 JY RST CHIPR 470 OHM 5% 1/10W YAGEO R836...
Page 61 Meridian 2 C912 065G1206102B2K CAP CHIP 1206 1000pF 630V X7R C910 065G1206102B2K CAP CHIP 1206 1000pF 630V X7R D806 093G 64 42 P BAV70 SOT23 BY PAN JIT D805 093G 6433P BAV99 CN901 006G 31500 EYELET PT801 006G 31502 1.5MM RIVET IC904 056G 158 12 KIA431A-AT/P TO-92...
Page 62 Meridian 2 U102 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U103 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U104 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U106 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U107 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS...
Page 63 Meridian 2 R127 061G0402101 JI TEST ONLY RST 0402 100R 5% 1/16W TA-I R124 061G0402101 JI TEST ONLY RST 0402 100R 5% 1/16W TA-I R123 061G0402101 JI TEST ONLY RST 0402 100R 5% 1/16W TA-I R119 061G0402101 JI TEST ONLY RST 0402 100R 5% 1/16W TA-I R113 061G0402101 JI TEST ONLY RST 0402 100R 5% 1/16W TA-I...
Page 64 Meridian 2 R420 061G04021200FF RST CHIPR 120 OHM +-1% 1/16W FENGHUA R420 061G04021200FT RST CHIP 120R 1/16W 1% TZAI YUAN R126 061G0402222 JI TEST ONLY RST 0402 2.2K 5% 1/16W TA-I R125 061G0402222 JI TEST ONLY RST 0402 2.2K 5% 1/16W TA-I R411 061G0402222 JI TEST ONLY RST 0402 2.2K 5% 1/16W TA-I...
Page 65 Meridian 2 C120 065G040210232K CAP 0402 1NF K 50V X7R C410 065G040210232K CAP CHIP 0402 1000PF 50V X7R C410 065G040210232K CAP CHIP 0402 1N 50V X7R +/-10% C707 065G040210425K CAP CHIP 0402 100N 25V X5R +/-10% C706 065G040210425K CAP CHIP 0402 100N 25V X5R +/-10% C704 065G040210425K CAP CHIP 0402 100N 25V X5R +/-10%...
Page 66 Meridian 2 C437 065G0402105A5K CAP CHIP 0402 1UF K 10V X5R C420 065G0402105A5K CAP CHIP 0402 1UF K 10V X5R C424 065G0402105A5K CAP CHIP 0402 1UF K 10V X5R C415 065G0402105A5K CAP CHIP 0402 1UF K 10V X5R C414 065G0402105A5K CAP CHIP 0402 1UF K 10V X5R C406 065G0402105A5K...
Page 67 Meridian 2 C416 065G0805475A2K CAP CHIP 4U7 10V X7R 10% C413 065G0805475A2K CAP CHIP 4U7 10V X7R 10% C404 065G0805475A2K CAP CHIP 4U7 10V X7R 10% FB409 071G 56K121 CHIP BEAD FB409 071G 56K121 M CHIP BEAD FB406 071G 56V301 B CHIP BEAD FCM2012VF-301T07 BULLWILL FB701 071G 56V301 B...
Page 68 Meridian 2 Service Kit Description Part No. Picture DDC KIT 715GT034-B NOVATEK ISP KIT...
Page 69: Different Parts List
Meridian 2 17. Different Parts List Diversity of 220S2SB/27 compared with 220S2SB/00 220S2SB/27 220S2SB/00 Location PCM Codes Description Location PCM Codes Description E08901 089G402A18N CX AC POWER CORD 1800MM AMERICA REG. E08901 089G404A18N CX AC POWER CORD 1800MM EUROPE Reg. Diversity of 220S2SB/69 compared with 220S2SB/00 220S2SB/69 220S2SB/00...
Page 70 Meridian 2 Diversity of 220S2CB/00 compared with 220S2SB/00 220S2CB/00 220S2SB/00 Location PCM Codes Description Location PCM Codes Description FQ101 705GQA34065 BEZEL ASSY for LGD FQ101 705GQA34048 BEZEL ASSY for LGD FQ101 705GQA34066 BEZEL ASSY for SEC FQ101 705GQA34049 BEZEL ASSY for SEC...
Page 71 FQ205 705GQACS 44032 EPS ASSY FQ205 705GQACS006 CUSHION ASSY FQ202 Q44GC145813 1A 22 LCD CARTON FQ202 Q44GC133813 1A 22 PHILIPS LCD CARTON Diversity of 220S2SS/00 compared with 220S2SB/00 220S2SS/00 220S2SB/00 Location PCM Codes Description Location PCM Codes Description FQ101 705GQA34104...
Page 72: General Product Specification
. SMART CONTROL & SMART MANAGEMENT REQUIREMENT SMARTContrast 500K: 1 (Typical) Waiting for supplier input . SMART Image . SMART Response . PrefectTune II (formerly FGA, FACTORY GAMMA Alignment) . PHILIPS LOGO displayed while power on . WEEE REQUIREMENT . RoHS REQUIREMENT . TCO5.0 REQUIREMENT...
Page 73 ISPLAY DISTURBANCES TO EXTERNAL ENVIRONMENT RELIABILITY ..............................86 ....................... 86 IME BETWEEN AILURES QUALITY ASSURANCE REQUIREMENTS ....................87 ..........................87 CCEPTANCE TEST PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY ..............87 REGULATORY COMPLIANCE ......................... 89 10.1 ........................89 ORLDWIDE EGULATORY 10.2 EMC R ..........................
Page 74: Foreword
All optical characteristics are determined according to panel specification after warming up longer than 30 minutes. 2. PRODUCT PROFILE 2.1 EDID header User visible strings on .inf file Philips 220S (22inch Wide LCD MONITOR 220S2) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx" 4 codes MSB(byte 12):...
Page 75: Scanning Frequencies
Scaler should be capable of below items. 1) Scaler must support color engine for Image enhancement feature (SmartImage) 2) Scaler must have enough memory to support PerfecTune feature and Philips OSD 3) Scaler must support SmartContras, 500K: 1 DCR preferred 4) Can be shared with 220S2 3.1 Interface signals...
Page 76: Interface
Meridian 2 3). USB PLUG 2.0 (not required in 220S2) USB port (1 upstream, 1 downstream) 4). Audio (not required in 220S2) Input signal: 1000 mVrms Loudspeaker: 1W+ 1W stereo of RMS Power Frequency range: (WAIT FOR SUPPLIER INPUT) Headphone connection will mute speakers 3.2 Interface 3.2.1 D-Sub Cable Length...
Page 77: Timing Requirement
Meridian 2 No Connect No Connect DDC clock DDC data No Connect T.M.D.S. data1- T.M.D.S. data1+ T.M.D.S. data1 shield No Connect No Connect +5V Power Ground (for +5V) Hot plug detect T.M.D.S. data0- T.M.D.S. data0+ T.M.D.S. data0 shield No Connect No Connect T.M.D.S clock shield T.M.D.S.
Page 78: Horizontal Scanning
_ 2008041 OSD TREE 220S2 OSD TREE-100108.xls KEY Bottom DEFINITIONS Bottom.jpg Power On Logo: Power On Show up Philips logo 3 seconds Change to input signal. POWER ON LOGO 22W_1680x1050.zip This picture is reference only. The official drawing will send out by PM.
Page 79: Vga Display Identification
Check if the device can work properly. 3.11 DDC /CI Support and Smart Manage/Control In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with, Philips SmartManage, SmartControl V6.1, and Portrait Display Tune at least. 3.12 Hot-key definition D:\ENG\monitor projects\spec\H8\hot k 3.13 Smart contrast (Dynamic contrast ratio)
Page 80 Meridian 2 E. If the model has multiple inputs including VGA and DVI, each input has their own set of profiles. When user switch input, the profile to be applied will also change. F. Each input can memorize their individual “Smart Image” profile status. For example, Smart Image is on with “Office”...
Page 81: Perfecttune
Meridian 2 C. Image Viewing i. Purpose: Design for image viewing application, especially in slide show. The screen is dominated by picture. Power point presentation could use this profile also. ii. Enhancement Point: 1. Dynamic contrast enhancement by histogram analysis (DLC) should be off. 2.
Page 82: Visual Characteristics
Meridian 2 4. VISUAL CHARACTERISTICS 4.1 Test conditions Unless otherwise specified, this specification is defined under the following conditions. (1) Input signal: As defined in 3.3, 1680 x 1050 non-interlaced mode (1680 x 1050@60Hz), signal sources must have 75 ohm output impedance. (2) Luminance setting: controls to be set to 300 nits with full screen 100 % duty cycle white signal (3) Warm up: more than 30 minutes after power on with signal supplied.
Page 83: Mechanical Characteristics
= 0.329 ± 0.015 5. MECHANICAL CHARACTERISTICS 5.1 Cosmetic - Philips ID 5.2 Mechanical data files - ProE files required 5.3 Location of Philips logo - Per Philips make-up sheet 5.4 Gap between panel and front bezel < 1.2mm (Typ.)
Page 84: Location Of Control Icons
• Base / Pedestal to be Flame Retardant UL 94-HB. • All major plastic parts (bezel, back cover) need to be molded from same resin. • Plastic resin type selection should be referred to “plastic-Philips Pool monitor”. 5.12 Texture/Glossing of housing •...
Page 85: Label
5.15 Label • Regulatory label / Carton label should follow Philips requirement. • China RoHS label • Detail document refer to Philips Engineering Reference Book. 5.16 Product dimension / Weight (Refer to Philips approved SHT 191/SHT560) • Unit dimension: •...
Page 86: Environmental Characteristics
Meridian 2 • Land 45‘ Truck and Trailer (1000X1200mm pallet) for UK • Truck shipment- Transportation request for all regions except China/India A. Air shipment B. 20’/40’/40’HQ Container loading for WW Transportation request for China and India A. Container loading for China and India B.
Page 87: Bright Dot Defects
According to MIL-STD-1916D Control III level AQL: NA (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00 9. PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL...
Page 88 Meridian 2 Fig 1: Measurement locations of Brightness Uniformity Fig 2: Cross talk pattern Gray level 46 (64 Gray level)
Page 89: Regulatory Compliance
10.2 EMC Requirements Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing specification. 10.3 RoHS Restriction on the use of certain hazardous substances.
Page 90 4. When the HV circuitry is operating properly there is no possibility of an x- tube must be the same type as the original, including suffix letter, or a Philips radiation problem. High voltage should always be kept at the manufacturer's approved type.

This manual is also suitable for:

220s2cb/27 220s2cb/93 220s2ss/00 220s2sb/00 220s2sb/27 220s2sb/69 ... Show all

Philips 220S2CB/00 Service Manual

Service

Note

Table of Contents

Quick Links

Chapters

Related Manuals for Philips 220S2CB/00

Summary of Contents for Philips 220S2CB/00

This manual is also suitable for:

Table of Contents