Table of Contents
Advertisement
Quick Links
INSTALLER: Please leave these instructions with the consumer.
CONSUMER: Please retain instructions for future reference.
WARNING: If the information in this manual is not followed, an explosion or fire could
result causing property damage, personal injury, or loss of life.
IF YOU SMELL GAS: Shut off gas to appliance immediately. If odor continues, call gas
supplier or Fire Department immediately.
We recommend that our products be installed and serviced by professionals who are certified
in the U.S. by NFI (National Fireplace Institute) or in Canada by WETT (Wood Energy
Technical Training). Installer must follow all instructions carefully to ensure proper
performance and safety.
INSTALLATION PREPARATION
Please carefully follow the steps below when: 1) Selecting the Location. 2) Construction of the
Enclosure. 3) Installation of the Complete Fire Pit.
It is the responsibility of the installer to follow all Local and State Codes concerning the
installation and operation of the fire pit.
The steps listed as WARRANTY REQUIREMENT must be strictly followed to qualify for
product 3 year warranty. Warranty will be void if not followed.
7/2/2007
www.hearthproductscontrols.com
Toll Free: (877) 585-9800
FPPK Series Complete Fire Pit Kit
Installation & Operating Instructions
829-1
Fax: (877) 433-0704
1
Advertisement
Table of Contents
Related Manuals for Hearth Products Controls FPPK Series
Summary of Contents for Hearth Products Controls FPPK Series
- Page 1 Toll Free: (877) 585-9800 Fax: (877) 433-0704 FPPK Series Complete Fire Pit Kit Installation & Operating Instructions INSTALLER: Please leave these instructions with the consumer. CONSUMER: Please retain instructions for future reference. WARNING: If the information in this manual is not followed, an explosion or fire could result causing property damage, personal injury, or loss of life.
- Page 2 1) SELECTING THE LOCATION: WARNING: FIRE PITS ARE DESIGNED STRICTLY FOR OUTDOOR USE ONLY. HEARTH PRODUCTS CONTROLS CO. MUST BE NOTIFIED OF ANY OTHER USE. WARNING: FIRE PITS CREATE VERY HIGH TEMPERATURES- IT IS VERY IMPORTANT THAT COMBUSTIBLES BE KEPT AT SAFE DISTANCES. LP CYLINDERS NOT CONNECTED TO THIS DEVICE MUST BE STORED AWAY FROM FIRE PIT.
- Page 3 3) INSTALLATION OF THE COMPLETE FIREPIT ASSEMBLY: Fig. 1 Fig. 2 FPPK Parts List: Item Part # Description FPPK Valve Box Assembly (1) N.A. Burner / Flat Pan Assembly (1) Cage for sensor (1) 692, 901 Spark Igniter / Thermocouple Assembly (1) SSC24 Inlet Flex Line- 24”...
- Page 4 ½” FIP x 3/8” Reducing Coupler (1) 3/8” M x 3/8” F Brass Fitting (1) SSC24 Outlet Flex Line- 24” (1) 1/2” x 3/8” Brass elbow. Installation Steps: WARNING: Check gas type: For NATURAL GAS: Minimum inlet pressure should be 5 inches W/C, maximum inlet is 10.5 inches W/C.
- Page 5 Step 7: Insert and tighten other end of orifice (Part #6 or #7) into elbow (Part #8). Step 8: Unscrew and separate union (Part #10). Insert and tighten other end of elbow (Part #8) into one side of Union (Part #10). Note: Other side of union use in Step 11. Step 9: Insert and tighten 3/8”...
- Page 6 2) Turn “off” gas to fire pit at LP bottle or other remote location. 3) Once fire pit has cooled completely, use appropriate cover to protect fire pit. Fire Pit Maintenance: 1) Keep fire pit covered at all times when not in use. 2) Keep any debris out of fire pit- clean as needed.
Need help?
Do you have a question about the FPPK Series and is the answer not in the manual?
Questions and answers