Cleaning And Maintenance; Safety Instructions; Troubleshooting - M-Life ML0658 Owner's Manual

•
Press and hold "
LCD will display PULSE or TONE appropriately.
• Outgoing calls restriction
This telephone provides possibility to restrict outgoing calls. To
change outgoing calls settings, switch position of the knob placed
at the bottom of the telephone.
Arrow pointing particular color indicates:
– red: all outgoing calls are enabled,
– green: only internal calls (calls to numbers proceded with „0" will
not be operated; option available only for telephones connected
to PBX),
– yellow: all outgoing calls restricted, only incoming calls active.

5. CLEANING AND MAINTENANCE:

Clean the device with soft, slightly damp cloth (without polishing or
abrasive products).
6. BATTERY INSTALATION / REPLACEMENT:
Install 3 Alkaline AA batteries into the battery compartment and re-
fit the cover before use.
Warning: before removing the battery compartment cover, ensure
the base is disconnected from the telephone line.

7. SAFETY INSTRUCTIONS:

• Any repair can be conducted by qualified service point exclusively.
Any attempts to repair device may result in damages and denote loss
of warranty.
• Producer does not claim responsibility for any damages caused by
inappropriate handling and use of the product.
EN
• Keep and store the device in dry place. Protect this product from
humidity.

8. TROUBLESHOOTING:

1. There is no dial tone from the handset.
Ensure the handset cord, telephone cord are connected correctly.
6
Owner's manual
" to change between tone and pulse dialing.