Roper RS20AWXEW00 Use And Care Manual page 22

To change crisper light
(on some models):
1. Unplug the refrigerator.
2. Pull top of light shield forward until it
snaps free.
3. Lower light shield to clear bottom sup-
ports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance
bulb.
6. Replace light shield in reverse order.
7. Plug in the refrigerator.
To change the upper freezer light
(on some models):
1. Unplug the refrigerator.
2. Lift top of light shield up and pull
shield out.
3. Replace bulb with a 40-watt appliance
bulb.
4. Place light shield over bulb and snap
shield into place.
5. Plug in the refrigerator.
To change lower freezer light:
1. Unplug the refrigerator.
2. Push in sides of light shield until it
snaps free.
3. Replace bulb with a 40-watt appliance
bulb.
4. Replace light shield.
5. Plug in the refrigerator.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
isper
light
Upper freezer light
Lower
freezer
' light
22
WITH QUESTIONS OR COMMENTS