Winix HUMIDIPUR AW600 Manual page 10

Operation
Sleep Mode
❶
Push the FUNCTION button to select
Sleep Mode.
The MODE button will cycle the unit
between the following:
Auto -> Continuous -> Sleep
❷
During Sleep Mode the unit will set fan
speed to lowest setting and the display
will turn off, except for the low fan speed
indicator.
Adjust Fan Speed
●
Push the FAN SPEED button to change
the Fan Speed.
The FAN SPEED button will cycle the unit
between the following:
Low -> Med -> High
17
Adjust Timer
●
Push TIMER button to set a timer.
The TIMER button will cycle through the
unit timer settings:
2 hours -> 4 hours -> 8 hours
PlasmaWave® Technology
During Humidification process
●
Push PLASMAWAVE/LOCK button to
operate PlasmaWave®.
Use this button to turn PlasmaWave®
function ON/OFF
During PlasmaWave® operation only
●
Push PLASMAWAVE/LOCK button to
operate PlasmaWave® while the unit OFF.
Use this button to turn PlasmaWave®
function ON/OFF without using the
humidification function of the unit.
Lock Button
●
Push PLASMAWAVE/LOCK button for
more than 3 seconds to activate Lock.
18