Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ISC TK 720/1
Summary of Contents for ISC TK 720/1
- Page 1 TK 720/1 Artikel-Nr.: 4340600 Tischkreissäge Ident-Nr.: 01021...
- Page 2 Komponenten / Ersatzteile Position Artikel-Nr. Beschreibung 434060002042 PVC -insert...
- Page 3 Operating Instructions Bench-Type Circular Saw TS 720/1 Art.-Nr.: 43.406.03...
- Page 4 Please read the operating Please pull out pages 2-5. instructions carefully before assembling and using...
-
Page 9: Items Supplied
Layout (Fig. 1) The same applies for the general rules of occupational health and safety. The manufacturer shall not be liable for any changes Saw table made to the machine nor for any damage resulting Saw blade guard from such changes. Push stick Even when the machine is used as prescribed it is Saw blade... - Page 10 Concentrate on what you are doing. Take a Persons working on the machine should not be sensible attitude to your work. Never use the tool distracted. when you are tired. Note the direction of rotation of the motor and Never use a tool with a switch that cannot be saw blade.
-
Page 11: Noise Emission Values
It is imperative to observe the manufacturer’s Caution! Risk of injury! Do safety, operating and maintenance instructions not reach into the running as well as the dimensions quoted in the saw blade. technical data. It is imperative to observe the accident prevention regulations in force in your area as well as all other generally recognized rules of safety. -
Page 12: Technical Data
5. Technical data 7. Assembly Always pull out the power plug before carrying out any maintenance or conversion work. Asynchronous motor 230 V 50 Hz Power rating 720 W S2 30 min 7.1 Fitting the saw blade (Fig. 2/3) Idle speed n 0 2800 rpm Caution! Pull out the power plug. -
Page 13: Using The Saw
8.0 Using the saw 9. Sawing operations 8.1 On/Off switch (Fig. 1) After each new adjustment it is advisable to carry out a trial cut in order to check the set The saw can be switched on by pressing the dimensions. -
Page 14: Maintenance
9.4 Making cross cuts (Fig. 13) Always use the parallel stop (7) and the angle stop (14) when making cross cuts. Workpieces must not exceed a maximum length of 160 mm between the parallel stop (7) and the blade (4), and a maximum width of 70 mm. Slide the angle stop (14) into the stop rail (25) of the parallel stop (7). - Page 16 Notes:...
- Page 17 Notes:...
-
Page 18: Warranty Certificate
WARRANTY CERTIFICATE The guarantee period begins on the date of sale and is valid for 2 years. Responsibility is assumed for faulty construction or material or functional defects. Any necessary replacement parts and necessary repair work are free of charge. We do not assume responsibility for consequential damage.
Need help?
Do you have a question about the TK 720/1 and is the answer not in the manual?
Questions and answers