Roaming - Audiovox CDM-8455 Owner's Manual

TX-65BWWE1104 2003.11.4 10:52 AM
SETTING
SETTING

ROAMING

SET MODE
To select the Preferred System:
1. Press [MENU]
2. Select one of the following options:
Home only : Only within your home area or home
affiliated area.
Analog Only : Stays in the analog setting until the
hand set is powered on after being
powered off.
Automatic : Scan the radio channels based on the
Automatic setting.
Digital Only : Stays in the digital setting until the
hand set is powered on after being
powered off.
3. Press to save.
FORCE ANALOG
Temporarily forces phone to use Analog mode -
mode automatically ends in 10 minutes.
1. Press [MENU]
2. Select "Yes" or "No", then press
activate it.
NOTE: Phone maybe able to go into digital mode after
making a phone call when "Force Analog"
selected.
Page 80 - Chapter 4
Page 82
NAM SETTING
Enables Auto NAM (Number Assignment Modules) or
manually selects a NAM.
AUTO NAM
.
Automatically switches phone to proper NAM when you
have multiple NAM registrations.
1. Press
2. Select "Yes" or "No" then press
CHANGE NAM
Changes the NAM used by the phone when you have
multiple registrations.
1. Press
2. Select "NAM1-BELL MOBILITY" or
.
[OK] to
SETTING
SETTING
[MENU] .
[MENU] .
"NAM2-BELL MOBILITY" then press
to save it.
[OK] to save it.
[OK]
Chapter 4 - Page 81