Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for InnoMedia ESBC 9328-4B
Summary of Contents for InnoMedia ESBC 9328-4B
- Page 1 InnoMedia ESBC 9328-4B Quick Install Guide www.innomedia.com...
-
Page 2: Table Of Contents
Table of Contents Introduction Package Contents CAUTION Installation Wall-Mounting Instructions Troubleshooting Appendix A. LED Status Summary Specifications Federal Communication Commission Interference Statement... -
Page 3: Introduction
Introduction Designed for Service Providers offering SIP trunking and high-speed data services, InnoMedia's ESBC 9328-4B is a highly integrated and highly manageable Enterprise Session Border Controller (ESBC) that can be auto-provisioned and remotely managed. It is ideally suitable for wide deployment by broadband service providers addressing SIP-PBX interoperability. -
Page 4: Installation
Installation 1. Connect the RJ-45 cable to the “WAN” connector. 2. Connect a grounding cable to be connected to the ground screw terminal as shown in the diagram. 3. Connect any standard analog telephone or fax machine to ESBCs “PHONE” connector, labeled 1-4. - Page 5 6. Connect included AC power cable to the electrical outlet and its cable to the ESBC’s “12V DC” connector. 7. Secure AC power cord in the plastic cable harness for power cable in the back of the unit. 8. At this point you have completed the ESBC installation. You will hear the dial tone when you pick up the handset of the phone or fax machine connected to the FXS port.
-
Page 6: Wall-Mounting Instructions
Wall-Mounting Instructions Optionally, you may choose to mount your ESBC on the wall. 1. Drill two holes 13.5 cm apart on the wall. 2. Use a screwdriver to install one #6 metal screw in each hole. Leave the screw heads 1/4 to 3/8 inch away from the wall. 3. -
Page 7: Troubleshooting
Troubleshooting Problem: Telephone on FXS port has no dial tone Solution: 1. Ensure that all cables (power, Ethernet, telephone) are properly connected to the ESBC. Ensure that ESBC’s AC power adapter is plugged in, and “PWR” indicator lights are ON (see Front Cover Picture). 2. -
Page 8: Appendix A. Led Status Summary
Network Interface - Uplink Connector RJ-45 Network Interface - Downlink ESBC 8328-4B:10/100 Base-T ESBC 9328-4B: 10/100/1000 Base-T Connector RJ-45 Dimension 2.5 in (H) x 7.8 in (W) x 6.0 in (D) 63.5 mm (H) x 198 mm (W) x 152 mm (D) Power Supply AC 100~240V/50~60Hz (DC 12V @ 4.0 Amps) -
Page 9: Federal Communication Commission Interference Statement
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. © 2015 InnoMedia Incorporated. All rights reserved. InnoMedia and the InnoMedia logo are trademarks of InnoMedia Incorporated. All other brand and product names may be trademarks of their respective companies.
Need help?
Do you have a question about the ESBC 9328-4B and is the answer not in the manual?
Questions and answers