S2750eN and S2750eP models. For more information on Side: specific configuration, accessing and using the web interface, and other aspects of the product, refer to the Nextiva S2750e Series User Guide. Lens Installation Kit The package contents are:...
Page 2
Nextiva S2750e Series Installation Guide Mounting 2. If you are mounting the camera on the ceiling or wall, mark the four positions for fixing the dome base on the mounting surface, then make the four holes. Preparation Base cable entry 1.
Page 3
3. If the camera uses power-over-Ethernet, refer to the Nextiva desired hole on the outer case with pliers. Insert the supplied rubber S2750e Series User Guide for the power and Ethernet connections. Go cap in the dome cable entry. to step 6.