Frame Assembly Up/Down; Belt Loading; Gear Pulley; Gear Loading - Sanyo dvw6100 Service Manual

DECK MECHANISM DISASSEMBLY
PWB(PCB) ASSEMBLY, OTHERS
UP/DOWN GUIDE
5. Frame Assembly Up/Down (Fig. 5-4)
Note
Put the Base Main face down(Bottom Side)
1) Release the Screw(S4)
2) Unlock the Locking Tab(L3) in direction of arrow and
then lift up the Frame Up/Down to separate it from the

Base Main.

Note
• When reassembling move the Guide Up/Down in direction
of arrow(C) until it is positioned as Fig.(C).
• When reassembling insert (A) portion of the Frame
Assembly Up/Down in the (B) portion of the Guide
Up/Down as Fig.(B)
6. Belt Loading(Fig. 5-4)
Note
Put the Base Main on original position(Top Side)
7. Gear pulley (Fig. 5-4)
1) Unlock the Locking Tab(L4) in direction of arrow(B) and
then separate the Gear Pulley from the Base Main.
LOADING GEAR
PULLEY GEAR
(L4)
LOADING BELT
(L6)
(S5)
MAIN BASE
(A)
(L5)
FIG. (A)
(C)
(B)
UP/DOWN GUIDE
(L3)
(L6)
MAIN BASE
(H1)
(C2)
(S4)
(A)
(B)
(A)
(B)
UP/DOWN GUIDE
UP/DOWN GUIDE
FIG. (C)
Fig. 5-4
8. Gear Loading (Fig. 5-4)
9. Guide Up/Down (Fig. 5-4)
1) Move the Guide Up/Down in direction of arrow(A) as
Fig.(A)
2) Push the Locking Tab(L5) down and then lift up the
Guide Up/Down to separate it from the Base Main.
Note
When reassembling place the Guide Up/Down as Fig.(C)
and move it in direction arrow(B) until it is locked by the
Locking Tab(L5). And confirm the Guide Up/Down as Fig.(A)
10. PWB Assembly Loading (Fig. 5-4)
Note
Put the Base Main face down(Bottom Side)
1) Release 2 Screws(S5)
2) Unlock the Loading Motor (C2) from the Hook (H1) on
the Base Main.
3) Unlock 2 Locking Tabs(L6) and separate the
PWB(PCB) Assembly, Others from the Base Main.
11. Base Main(Fig. 5-4)
5-4
(L6)
FRAME UP/DOWN
FIG. (B)