Download Print this page
Electro Detectors EDA-Z1000 Operation Manual

Electro Detectors EDA-Z1000 Operation Manual

Radio fire alarm system zerio

Advertisement

EDA-Z1000
Radio Fire Alarm System
Operation Manual
Electro-Detectors Ltd.
Electro House, Edinburgh Way
Harlow, Essex, CM20 2EG UK
Tel: 01279 635668. Fax 01279 450185
eda@electrodetectors.co.uk
Email:
Web: www.electrodetectors.co.uk
Electro-Detectors
Version Z1000/V1.05

Advertisement

loading
Need help?

Need help?

Do you have a question about the EDA-Z1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Electro Detectors EDA-Z1000

  • Page 1 EDA-Z1000 Radio Fire Alarm System Operation Manual Electro-Detectors Ltd. Electro House, Edinburgh Way Harlow, Essex, CM20 2EG UK Tel: 01279 635668. Fax 01279 450185 eda@electrodetectors.co.uk Email: Web: www.electrodetectors.co.uk Electro-Detectors Version Z1000/V1.05...
  • Page 2 EDA-Z1000 - Installation and Operation Manual Please note: No operator serviceable parts are contained within this panel. Always refer to a qualified technician for parts and servicing. This manual should be provided to the site’s nominated ‘responsible person’ and left on the premises for easy reference.
  • Page 3: Revision History

    EDA-Z1000 - Installation and Operation Manual Revision History Manual Author Software Date Description Version Version V1.00 0.08 01-10-05 First Release V1.01 0.10 01-11-05 Sounder Repeater Added to System, Access code override function and ability to view access codes, re-program devices to factory settings, re-program unique Id. Antenna monitoring configuration added.
  • Page 4: Table Of Contents

    EDA-Z1000 - Installation and Operation Manual Contents / Index Introduction Front Panel Display and Keys User Operations System Normal Fault Conditions To Silence a Fault To Reset a Fault Alarm Condition To Silence Sounders To Re-sound the Sounders To Reset an Alarm Menu Navigation 3.10...
  • Page 5: Introduction

    EDA-Z1000 - Installation and Operation Manual Introduction Electro Detectors has been manufacturing radio fire alarm systems for over 16 years and has now complemented its range of products with a smaller purpose built control panel , the Zerio system. It has been designed for smaller systems and is capable of handling 99 devices in 8 zones.
  • Page 6: Front Panel Display And Keys

    EDA-Z1000 - Installation and Operation Manual Front Panel Display and Keys Status Supply – This LED will be illuminated when mains is present Delays Active – Illuminated if a fire condition exists and delays are programmed. Disablements-Illuminated if any Figure 1.1 Front Panel Display and Buttons devices or zones are isolated.
  • Page 7: User Operations

    EDA-Z1000 - Installation and Operation Manual User Operation Please note: No operator serviceable parts are contained within this panel. Always refer to a qualified technician for parts and servicing. System Normal In normal operation the screen will show either the date and time, contact details or alternate the two depending on the customers requested settings.
  • Page 8: To Re-Sound The Sounders

    EDA-Z1000 - Installation and Operation Manual Note: It is possible to configure the system to silence, re-set and re-sound without the need to enter a valid user code by setting ‘Code Protect’ to off in the panel configuration options. Please be aware that turning code protect off may mean that the installation contravenes relevant standards.
  • Page 9: To Isolate A Device

    EDA-Z1000 - Installation and Operation Manual 3.12 To Isolate a Device Once a device is isolated it will not display any fault or alarm event. Press ‘MENU’ and enter a valid password. Select ‘2- Disable/Enable’, select ‘1-Disable’, select ‘2-Disable Device’. Using the ↑ or ↓ keys select the device number to be disabled and press ‘ENTER’...
  • Page 10: Advanced User Operations

    EDA-Z1000 - Installation and Operation Manual 4. Advanced User Operations Please note: No operator serviceable parts are contained within this panel. Always refer to a qualified technician for parts and servicing. General Assuming the correct password is entered, the user can sign on as an advanced user. This allows some extra functions not available to the basic user.
  • Page 11 EDA-Z1000 - Installation and Operation Manual Actuators If actuators are not required to operate then set ‘Actuators’ to OFF. Actuators are output devices used to control equipment like magnetic doors, other alarm systems, gas valve shut-offs, air conditioning etc. It would be normal for actuators to be isolated in an alarm test.
  • Page 12 EDA-Z1000 - Installation and Operation Manual Version Z1000/V1.05 Electro-Detectors Page 12...