Table of Contents
Advertisement
Right Side (Timer only):
1. To change the time on right, press and hold the TEMP button, then press and hold any
program button on the right for one second. The LED above the program button will light
and the right display will read "_ _ _ _." Enter the four-digit security code sequence: 4, 3,
2, 1. The security code will not show on display. Once the correct sequence has been entered,
the preset time will be displayed and the LED for that program will begin to flash.
2. Set the time with the "+ or -" buttons.
3. Press the TEMP button to save the time.
4. The LED will stop flashing but will remain lit.
5. Press any other program button within 15 seconds to continue programming without re-
entering the security code.
6. While programming a program (LED is flashing), if no input is received for 15 seconds the
unit will revert to normal operation and the security code must be re-entered.
Operation:
1. Pressing any program button (1-4) will start the timer countdown and display the remaining preset
time. The LED for the appropriate program will be lit during the countdown and will remain lit until
another program is selected.
2. When the display reaches "00:00", the buzzer will sound and the digits will flash.
3. Press the program button to silence the buzzer and return the readout to programmed time.
4. The right and left sides will operate independently of each other. Both timers can be in operation
at the same time. The "00:00" display will show which side is timed out.
NOTE: Metal utensils may be used, however, using nonmetal utensils will prolong the life
of the cooking surface.
5. Turn the unit off when it is not in use.
9
Advertisement
Table of Contents
