Advertisement
Quick Links
Advertisement
Related Manuals for ADENDORFF CM650
Summary of Contents for ADENDORFF CM650
- Page 1 CM650 CONCRETE MIXER OPERATING INFORMATION...
- Page 2 SPECIFICATIONS TABLE Item Description Weight 722 Lbs Capacity 9 Cubic Feet Drum Diameter 28” Pneumatic Wheel Diameter 12” Barrel Pulley 14.5” Engine HP 7.5HP (Gas) 5.5HP(Diesel) Gas Engine Pulley 3” Gas Engine Speed 3600RPM Drum Speeds 20 RPM (Low speed to keep cement from setting) 36 RPM (Maximum speed for heavy mixing) SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, operating,...
-
Page 3: Specific Product Warnings And Precautions
5. USE EYE, HEARING, AND DUST PROTECTION. Wear approved safety impact eyeglasses, approved hearing protection, and approved dust protection when working with this product. 6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when working with this product. Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. - Page 4 MOVE THE CEMENT MIXER WHILE IT IS RUNNING. BEFORE PERFORMING SERVICES, MAINTENANCE, OR MOVING THE CEMENT MIXER, TURN OFF THE GAS ENGINE (PART#45) AND DISCONNECT THE SPARK PLUGWIRE TO PREVENT ACCIDENTAL STARTING. 2. PRIOR TO USING THE CEMENT MIXER, MAKE SURE YOU READ AND COMPLETELY UNDERSTAND THIS INSTRUCTION MANUAL AND THE GAS ENGINE MANUFACTURER’S INSTRUCTION MANUAL.
- Page 5 1. CAUTION: Do not attempt to move the Cement Mixer when it is full and/or in operation. 2. Place the Cement Mixer on a solid, flat, and level surface that is capable of supporting the weight of the mixer and it’s load. 3.
-
Page 6: Maintenance And Cleaning
discharging the concrete mix and before refilling the Drum. (See Assy. Diagram.) 10. After discharging the cement mix, turn the Hand Wheel (part #51) clockwise4o return the Drum (parts #4) to its original position. Then, make sure to fully engage the Brake Handle (part #60). 11. -
Page 7: Please Read The Following Carefully
manufacturer’s manual/for the type level of oil recommended, and all other Engine service and maintenance instructions. 9. Periodically, inspect the Speed Converter Assembly (part #19) and the Wheel Bearings (part #77) for proper lubrication. (See Assy. Diagram.) PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor have provided the parts diagram in this manual as a reference tool only. - Page 8 Parts List Description Qty Item # Description Item # Bolt Bolt Spindle Assembly Bolt Bearing Engine Base Drum Assembly Small Pulley Engine Washer V—Belt Bolt Inner cover Ring Gear Hinge Shaft Yoke Weld Outer Cover Bearing Housing Bolt Hand wheel Washer Washer Guard Brake Upper...
- Page 9 NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
- Page 10 ASSEMBLY OF THE CEMENT MIXER This mixer is simple to assembly. Please follow the following steps after you have finished unpacking and checking. STEP 1 Attach the two Wheels (part # 78) to the Wheel Shaft (part # 71) with bolts and nuts supplied.
Need help?
Do you have a question about the CM650 and is the answer not in the manual?
Questions and answers